Bitter tastes after finished

Sugar wash info and questions

Bitter tastes after finished

Postby rossgillespie » Sun Mar 11, 2018 12:03 pm

Hi all
Still getting bitter tastes come though even after I do harsh cuts, any advise or tips to prevent this is it possibly something in ferment side of things?
rossgillespie
 
Posts: 31
Joined: Fri Feb 12, 2016 4:08 pm
Location: Adelaide
equipment: Pure distilling ultra pure with 30ltr boiler

Re: Bitter tastes after finished

Postby Nathan02 » Sun Mar 11, 2018 12:25 pm

Reflux Still? Is your packing and column clean from your last run?
Nathan02
 
Posts: 419
Joined: Mon Sep 11, 2017 7:36 pm
equipment: 6" 4 plate bubbler with optional packed section.

Re: Bitter tastes after finished

Postby Doubleuj » Sun Mar 11, 2018 1:06 pm

What wash did you use?
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: Bitter tastes after finished

Postby rossgillespie » Sun Mar 11, 2018 1:10 pm

Sorry guys
Yeh reflux still
Always pull packing out clean after every run
Using tpw wash
rossgillespie
 
Posts: 31
Joined: Fri Feb 12, 2016 4:08 pm
Location: Adelaide
equipment: Pure distilling ultra pure with 30ltr boiler

Re: Bitter tastes after finished

Postby bluc » Sun Mar 11, 2018 2:08 pm

Any sediment making it into boiler possibly burning?
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Bitter tastes after finished

Postby rossgillespie » Sun Mar 11, 2018 4:22 pm

Nah shouldn't be
I leave to settle for good week or 2 and don't collect down close enough to yeast bed.
What things usually contribute to getting bitterness through yo final product when doing a tpw wash?
rossgillespie
 
Posts: 31
Joined: Fri Feb 12, 2016 4:08 pm
Location: Adelaide
equipment: Pure distilling ultra pure with 30ltr boiler

Re: Bitter tastes after finished

Postby EziTasting » Sun Mar 11, 2018 4:57 pm

Not sure what causes bitterness, but we had that happen after doing a corn mash and boiling it with quite a bit of sediment in the boiler... this then burnt onto the element and went throughout the still... we ended up pulling the whole thing apart and washing it twice with dishwashing liquid (actually boiling the smaller bits'n'pieces) and then washing it with hot water 2 or 3 times... we scrubbed the boiler and larger pipes...
Once we had that all done, we assembled the lot and did a caustic soda wash, broke it down cleaned it, reassembled it did oust a water run, then a vinegar run and a sac run... the bitterness now is almost gone .. not 100% sure it was caused by the corn mash, but things have not been the same since.

So blucs' suggestion of sediment is a strong possibility... from my perspective.

Never had any bitterness from any wash beforehand.
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Bitter tastes after finished

Postby bluc » Sun Mar 11, 2018 8:53 pm

Or maybe a lacto infection :-B I have had two and gives spirit a sour/bitter taste. It fades with time on oak. But neutral is quite often unaged..may explain the" twang" in the other blokes thread also.
Last edited by bluc on Sun Mar 11, 2018 8:57 pm, edited 1 time in total.
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Bitter tastes after finished

Postby Dogfish » Sun Mar 11, 2018 9:18 pm

Hi @rossgillespie ,

Are you doing striping runs first before final spirit run?
What % abv are you getting from spirit run.

Have you tasted the wash before the strip run to make sure it has no sweetness. It should taste like dry cider.
Dogfish
 
Posts: 30
Joined: Sun Aug 21, 2016 7:03 am
Location: Wide Bay, QLD
equipment: 2" VM Still. 1.5 meter column with 3/4" take off. Keg boiler.

Re: Bitter tastes after finished

Postby rossgillespie » Mon Mar 12, 2018 4:26 pm

No I just do a single reflux run
Comes out @ 92%

Yeh wash is always quite dry when finished
rossgillespie
 
Posts: 31
Joined: Fri Feb 12, 2016 4:08 pm
Location: Adelaide
equipment: Pure distilling ultra pure with 30ltr boiler

Re: Bitter tastes after finished

Postby rossgillespie » Mon Mar 12, 2018 4:52 pm

Just noticed these little white dots?
They are above the wash line but infection???
You do not have the required permissions to view the files attached to this post.
rossgillespie
 
Posts: 31
Joined: Fri Feb 12, 2016 4:08 pm
Location: Adelaide
equipment: Pure distilling ultra pure with 30ltr boiler

Re: Bitter tastes after finished

Postby bluc » Mon Mar 12, 2018 6:52 pm

The dots do look like the start of a lacto infection.
This photo is similar to what mine looked like but was a pretty major infection.
images (2).jpeg


Looking at yours I dont think it would have a major impact but not sure since your doing neutral maybe its more noticeable. I havnt done neutral yet. The presence of lactic acid does give it a sour/bitter taste. And I much prefer my whiskey without it... :handgestures-thumbupleft:
You do not have the required permissions to view the files attached to this post.
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Bitter tastes after finished

Postby rossgillespie » Mon Mar 12, 2018 9:17 pm

Best way to remove lacto infection from all equipment?
Phosphoric acid 10% sanitised do the trick?
rossgillespie
 
Posts: 31
Joined: Fri Feb 12, 2016 4:08 pm
Location: Adelaide
equipment: Pure distilling ultra pure with 30ltr boiler

Re: Bitter tastes after finished

Postby bluc » Tue Mar 13, 2018 8:48 am

Sodium percarbonate will do it give everything a good soak also lot safer than messing round with acids. :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Bitter tastes after finished

Postby Rolls912 » Thu Mar 29, 2018 11:02 am

hmmm, this makes me think this could be my problem too (sediment making it into the still). I usually use the tap and then turn it off when it gets close to the bottom. Whats the best way to transfer the contents from a fermenter to a still? Do people use a pump? Gravity siphoning?
Rolls912
 
Posts: 204
Joined: Tue Feb 14, 2017 10:16 pm
equipment: 5SD 4inch Boka
5SD pot still
5SD milk can
Carter head
Charcoal filter
Temp controller

Re: Bitter tastes after finished

Postby bluc » Thu Mar 29, 2018 1:19 pm

I use a magnetic pump :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Bitter tastes after finished

Postby RC Al » Thu Mar 29, 2018 2:52 pm

Suck suck suck suck :puke-huge:
RC Al
Mentor
 
Posts: 1568
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: 3 plate 4" glasser
2" Potty

Re: Bitter tastes after finished

Postby Professor Green » Thu Mar 29, 2018 6:07 pm

Rolls912 wrote:hmmm, this makes me think this could be my problem too (sediment making it into the still). I usually use the tap and then turn it off when it gets close to the bottom. Whats the best way to transfer the contents from a fermenter to a still? Do people use a pump? Gravity siphoning?


Hi mate.

I use a pump but then I have a 250 litre fermenter and a 100 litre boiler.

Since you're using a T500 I imagine you've got a 30 litre fermenter in either a bucket style or a barrel style from the HBS. If so, the sediment should settle out just below the tap however unless you're using one of the sediment reducing attachments on the tap, you will get some sediment settling in the tap too. You can just run the tap into a bucket for a little bit to allow any sediment in and around the tap to come out before you start transferring to the boiler. The little bit of wash you lose doing this is not going to make much of a dent in your yield. Siphoning will work well too provided you keep the end of the hose well away from the sediment otherwise it'll vacuum it up.

Cheers,
Prof. Green.
Professor Green
 
Posts: 2483
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Bitter tastes after finished

Postby bluc » Thu Mar 29, 2018 7:31 pm

RC Al wrote:Suck suck suck suck :puke-huge:

Especially at 6.30am on sunday after a night on piss :puke-huge:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Bitter tastes after finished

Postby Plumby » Thu Mar 29, 2018 8:13 pm

bluc wrote:
RC Al wrote:Suck suck suck suck :puke-huge:

Especially at 6.30am on sunday after a night on piss :puke-huge:

Been there, done that many times.:laughing-rolling:
I used my old beer siphon for ages, it was very technically advanced, I zip tied a wooden dowel 2 inches past the end of my silicon tube. That way when the dowel touched the bottom of the fermenter the silicon tube was still in clear wash. That way I never got much slurry into my boiler.
Plumby
 
Posts: 1175
Joined: Sat Aug 02, 2014 7:19 am
Location: South East Queensland
equipment: 50 litre keg boiler with a 2200watt element and a 2 inch pot still called Shaniqua with a 32mm over 19mm 800mm long liebig condenser attached.

Next

Return to Sugar wash's



Who is online

Users browsing this forum: No registered users and 15 guests

x