My new mash tun screen

[TheMechwarrior]

So a new 300L variable capacity tank arrived and it was time to build a screen for the new mash-tun.

Here's the drawing:


It consists of a base screen attached to a couple of supports.
There's also a replica top screen to sit on top to allow me to close off the openings a little if needed.

Here's a view of the completed product from the underside (still needs a clean):


Here's a view of the top:


Fingers crossed this does the job for me.

Cheers,

Mech.

[1 2many]

Just curious Mech wy you made the walls so high :-B

I recon you could get away with half the height. :think:

[TheMechwarrior]

The top of the outlet hole (side discharge) is roughly 75mm from the base, so I just rounded it up to 100mm.

[1 2many]

gotcha :handgestures-thumbupleft: