Page 1 of 2
200L mash tun
Posted:
Wed Nov 15, 2017 2:50 pm
by j0sh2008
I just got my 200L Mash tun.
Hopefully within the next week i will be putting on some AG :happy-partydance:
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 3:03 pm
by bluc
Sweet as can I ask how much that set you back :scared-eek:
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 3:25 pm
by j0sh2008
It cost me $580 for the tun with the custom immersion coil (Would have been cheaper without the coil, but i wanted to have it for cooling/Heating) I got it delivered to my door as i didn't want to deal with all the problems at customs and port fees etc, So postage cost me another $400. It ended up costing a bit, but its alright :D
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 3:43 pm
by bluc
Considering a plain used stainless drum goes for 300-400 on gumtree I would say you did well. Is it all sanitary welded?
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 3:49 pm
by j0sh2008
bluc wrote:Considering a plain used stainless drum goes for 300-400 on gumtree I would say you did well. Is it all sanitary welded?
Thanks mate :handgestures-thumbupleft:
Yeah all sanitary welded. I made sure of that first because i have seen mash tuns that are not sanitary welded and trying to clean them..
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 6:39 pm
by viking
Holy shit!
I thought my 114L pot with false bottom was big!
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 9:17 pm
by CyBaThUg
Where was this purchased
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 9:21 pm
by j0sh2008
I have a supplier over in China. I was thinking of getting a few more as i just ordered one for a friend. But not sure if anyone would be interested.
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 9:40 pm
by Sam.
j0sh2008 wrote:I have a supplier over in China. I was thinking of getting a few more as i just ordered one for a friend. But not sure if anyone would be interested.
Might want to read the commercial advertising rules before you go any further with that venture on this forum.
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 10:06 pm
by j0sh2008
Sam. wrote:j0sh2008 wrote:I have a supplier over in China. I was thinking of getting a few more as i just ordered one for a friend. But not sure if anyone would be interested.
Might want to read the commercial advertising rules before you go any further with that venture on this forum.
Hey Sam :greetings-waveyellow:
I thought you would comment. I’m not a commercial seller or seller as any sort and understand that 5star is the sole advertiser on AD. Just if anyone was interested I was more then happy to help. Not looking for a profit
Re: 200L mash tun
Posted:
Wed Nov 15, 2017 10:31 pm
by Sam.
All good as per your PM, keep an eye on the group buying section of the forum :handgestures-thumbupleft:
Re: 200L mash tun
Posted:
Tue Oct 02, 2018 6:04 pm
by j0sh2008
Finally got around to setting up the mash tun. It’s taken a while.
I’m just waiting on the silicone hoses and connects to come then will be up and running :happy-partydance:
Re: 200L mash tun
Posted:
Tue Oct 02, 2018 6:21 pm
by Georgio
A thing of beauty mate :-B
Re: 200L mash tun
Posted:
Tue Oct 02, 2018 7:36 pm
by bluc
Whats your hlt made from? :-B comercial stock pot?
Re: 200L mash tun
Posted:
Tue Oct 02, 2018 8:16 pm
by j0sh2008
Georgio wrote:A thing of beauty mate :-B
Thanks mate :handgestures-thumbupleft:
bluc wrote:Whats your hlt made from? :-B comercial stock pot?
Its actually for corn. I'm not sure how i'm going to set it up yet, still trying to figure that out, Sam gave me some good ideas :handgestures-thumbupleft: But i found it on gumtree for $30 so i couldn't not buy it :happy-partydance:
But i have 2 elements after the false bottom of my mash tun that i will use for the strike water and then i have a 5star rims that I'm going to setup. I still have to set up all the plumbing, i have an immersion chiller that I'm going to connect and use my still cooling lines.
Re: 200L mash tun
Posted:
Mon Dec 10, 2018 3:32 pm
by j0sh2008
Finaly got it all up and running. Giving it a good clean out now :handgestures-thumbupleft:
Next week time to start mashing :D
https://youtu.be/Wugf1U3AOuA
Re: 200L mash tun
Posted:
Mon Dec 10, 2018 3:45 pm
by j0sh2008
:happy-partydance:
Blue and red pex pipe is connected to my still cooling lines and IBC's. It should cool the wort quick enough and save buying another cooler.
Re: 200L mash tun
Posted:
Mon Dec 10, 2018 9:14 pm
by bluc
Sweet as very jelous :mrgreen:
Re: 200L mash tun
Posted:
Fri Dec 14, 2018 1:47 pm
by pat_00
And here I was getting all excited about my new 80l mashtun build.
But how the hell are you gonna clean out that thing at the end of a mash?
Re: 200L mash tun
Posted:
Fri Dec 14, 2018 2:06 pm
by j0sh2008
:laughing-rolling: yeah it's going to be a bit of a pain.. I'm hoping to get a stand made with some kind of swing for the mash tun. So I can swing it forward and clean it out easy.