pH levels

all about mashing and fermenting grains

pH levels

Postby crow » Sat Nov 10, 2012 11:01 pm

This post probably doesn't belong here but I'm not sure where else it belongs , almost needs it own subbie in this section :
Ok just wondering what everyone uses to raise pH . I've used gypsum, calcium carbonate , hydrated lime, calcium sulphate all seen to work but I have read the lime can have a slight carry over flavour that some say is not a particularly bad thing
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: pH levels

Postby Kimbo » Sun Nov 11, 2012 1:58 am

Its funny you should mention this coz i was wondering myself.
I also just ordered one of these
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: pH levels

Postby Urrazeb » Sun Nov 11, 2012 2:43 am

Soda ash here, seems to do what its there for :shock:
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: pH levels

Postby crow » Sun Nov 11, 2012 11:08 am

Kimbo wrote:Its funny you should mention this coz i was wondering myself.
I also just ordered one of these

got them on my watch list one company from Hong Kong says they deliver within 14 days was about $9
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: pH levels

Postby Kimbo » Sun Nov 11, 2012 12:14 pm

I've just ordered mine from HK too, hasnt landed yet. I'll keep you posted
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: pH levels

Postby Goldie » Mon Nov 12, 2012 12:38 am

Kimbo wrote:Its funny you should mention this coz i was wondering myself.
I also just ordered one of these


I have the same unit, seems to work fine. Only used it 3 or 4 times so time will tell.
Goldie
 
Posts: 422
Joined: Fri Mar 23, 2012 12:22 am
Location: SOR Perth, WA
equipment: 4" four perf plate column on a 100lt SS boiler, 2" Pot Still on 50lt keg boiler

Re: pH levels

Postby Goldie » Mon Nov 12, 2012 12:43 am

Oh yeah and I use calcium carbonate, haven't tried anything else
Goldie
 
Posts: 422
Joined: Fri Mar 23, 2012 12:22 am
Location: SOR Perth, WA
equipment: 4" four perf plate column on a 100lt SS boiler, 2" Pot Still on 50lt keg boiler

Re: pH levels

Postby Aussiedownunder01 » Mon Nov 12, 2012 6:42 am

Question what ph do you need and for what product [still learning you see ] how accurate does it need to bee
I have a ph meter i won when i was into aquaponics its a bluelab $350.00 so it will do the job when i find out what you need it for :oops:
Aussiedownunder01
 
Posts: 1133
Joined: Tue Sep 11, 2012 7:25 am
Location: So close to melbourne airport you can hear the plains
equipment: 100 litre boiler with a 4 in 5 plate bubbler on top with a 500 packed section standing by if needed

Re: pH levels

Postby crow » Mon Nov 12, 2012 10:12 am

Most ppl seem to say between 4 and 5 I could stand corrected ;-)
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: pH levels

Postby NotBenStiller » Mon Nov 12, 2012 12:07 pm

i've got one of those little yellow pH meters - quite handy - it let me know once when a WPOSW went too acid >3
I tried adding some calc carb but it didn't seem to adjust the pH at all - maybe i was adding too little but i didn't want to add any off flavours so i just left the wash to settle and ran it at SG 1020 anyways
NotBenStiller
 
Posts: 341
Joined: Thu May 24, 2012 5:36 pm
Location: Perthian
equipment: 3" DR bok....

pH levels

Postby wynnum1 » Tue Nov 20, 2012 10:04 am

If some of the water comes from reverse osmosis After reverse osmosis the water contains no minerals and is very soft. The water is remineralised by adding lime and carbon dioxide,
Water with no minerals can damage pipes and if water was acidic could also cause problems.
wynnum1
 
Posts: 1494
Joined: Tue Jul 26, 2011 1:18 pm


Return to The Mash tun



Who is online

Users browsing this forum: No registered users and 79 guests

x