AG Bourbon wash size converter

[Hava]

Hi guys,

Little spread sheet to help with an AG Bourbon batch.

I have put this together so you can plug in the wash size that you are going for (i.e. after grains are removed), it will give you the amount of water you need, the grain bill, the Kg's of each grain and an approx ltrs of space required to mash in to achieve the end result.

How do you use it? Simply enter the wash size you want in the only green cell and presto!

Grain bills are based on mash bills from distilleries thread (http://aussiedistiller.com.au/viewforum.php?f=12)

For the how to mash instruction manual see Brendan's All Grain Bourbon thread http://aussiedistiller.com.au/viewtopic.php?f=12&t=5399

There are lots of assumptions made in putting this together and if anyone can give me the specifics I can update the sheet if required.

1 - Grain will absorb 20% of the water
2 - ABV of all washes in this are 8.5%
3 - Conversion by weight - Corn -70% Barley & Rye 50%

[res]

Top job Hava, cheers :handgestures-thumbupleft:

[Kimbo]

That's brilliant Hava,
that's going straight to the pool room :handgestures-thumbupleft:
( By that i mean I will duplicate it in the Calcs section too)

[Urrazeb]

Awesome addition to the fourm mate :handgestures-thumbupleft:

[vqstatesman]

Many thanks for sharing this Hava.

I'm assuming this is for a no sparge method? Also assuming you don't ferment on the grain? Please let me know.

[Hava]

No sparge, ferment on grain, make for fun squeezing the grain out.