Mormash wrote:bluc wrote:Do your seals have the centre bit removed? Usually the bit inside the ridge gets removed then the plate sits inside. Unless there is a groove cut into the tee for plate to sit in..
I reckon that's going to be the solution, bluc. I've been stewing over the idea of removing the inner part of the seals or shaving the outsides of the plates.
So if I cut the inside of the seals should I be safe to cut it right up flush with the centre rib?Yep, if you trim the inner piece of the seal off up to the rib and your plate will fit in up to the rib on the seal, that's how macs bubblers seal. Granted I don't know what size your plates are.
I would generally just try it before asking however the hbs is all out of seals and I've got 3 60l washes ready to go so don't wanna risk messing this up.