Second improved run with T500

Just starting out and need some advise? then post it in here.

Second improved run with T500

Postby Pist n broke » Sun Jan 28, 2018 11:07 am

Doing my last turbo run (is my second ever run)... this time I ran water very fast ... maybe 1L per min. At 45c the first drips... three the first 150ml... did not touch the water... drip drip drip spuirt drip drip.... collected 2L and still going.... temp is 55.9c now... still pumping out....
I’m cutting every 250ml and having a smell... of it smells good I am adding it to the final product.
All sounds good...??
Pist n broke
 
Posts: 71
Joined: Mon Apr 17, 2017 7:55 pm
Location: Northside Brisbsne
equipment: T500.... Trying to learn...

Re: Second improved run with T500

Postby Doubleuj » Sun Jan 28, 2018 11:16 am

Sounds good to me :handgestures-thumbupleft: I especially like the part about your last turbo
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: Second improved run with T500

Postby Pist n broke » Sun Jan 28, 2018 11:42 am

:)) :)) :laughing-rolling:
Pist n broke
 
Posts: 71
Joined: Mon Apr 17, 2017 7:55 pm
Location: Northside Brisbsne
equipment: T500.... Trying to learn...

Re: Second improved run with T500

Postby Pist n broke » Sun Jan 28, 2018 1:50 pm

Well I started the boiler at 9:20am and just packed up at 2pm.... I must admit I put the water on fast about 1L per min and left it alone until I had collected about 3L.... It started to drop down to a drip every 2-3 seconds.... I cranked the heat up a bit and got to 85c then switched off.... I reckon the last half a cup was fowl.... I would say about 95% of the run wS hearts...
Could I be right with this....? I did cuts 250mls and all were exactly thr same until the last cup....

Pretty proud actually.... Well off the Coles to get ingredients for a TPW....
Pist n broke
 
Posts: 71
Joined: Mon Apr 17, 2017 7:55 pm
Location: Northside Brisbsne
equipment: T500.... Trying to learn...

Re: Second improved run with T500

Postby bluc » Sun Jan 28, 2018 1:53 pm

You should have had some heads at the start of the run :think: let them air 24-48hrs then check them again..
Last edited by bluc on Sun Jan 28, 2018 1:54 pm, edited 1 time in total.
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section


Return to Beginners Questions



Who is online

Users browsing this forum: Google [Bot] and 26 guests

x