What to do with the first gen?

Just starting out and need some advise? then post it in here.

What to do with the first gen?

Postby Matt_Pl » Mon Jul 30, 2018 8:35 pm

G'day all,

Another noobie question, after making various types of vodka for the last 6 years Ive started 2x UJSSM and 1x McRum. I'll be running 4 plates with my neutraliser in a single pass as per Macs old operating instructions.

I have a couple of questions;
1) what should I do with my first gen? Add to the second gen spirit run?

2) I've read that a lot of people take it to 5-7 generations. That's fine but what do you do then? Tip it all out and start at Gen 1 again? I was thinking of storing 2 x 10 litres of backseat from gen 2 in the freezer and adding that to the gen 1 ?

3) is there any benefit of keeping the yeast from my last gen alive and adding it to my first generation?

Lastly is there a bible of home distilling that is recommended? I loVe the forums, youtube and Facebook sites, but I feel I will refine my hobby if I'm sitting by the fire on my bear skin rug, smoking a cigar while sipping on homemade rum in Darwin if I've got a decent book to read while doing so?

Thanks all

Matt
Matt_Pl
 
Posts: 298
Joined: Tue Jul 23, 2013 11:42 pm
Location: Darwin
equipment: 4" FSD Neutraliser, custom made 50 litre SS Keg Boiler powered by 4800 killer wasps.

Re: What to do with the first gen?

Postby bluc » Tue Jul 31, 2018 7:13 pm

Distillers guide to rum is not a bad read if rum is your thing :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8968
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: What to do with the first gen?

Postby woodduck » Tue Jul 31, 2018 9:28 pm

1) you can or you could drink it, just lighter flavour but still good.

2) keeping backset is a good idea

3) don't know never bothered

This forum is the bible :laughing-rolling:
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: What to do with the first gen?

Postby bluc » Wed Aug 01, 2018 9:23 am

As far as gens I normally mix them all together once finished..
bluc
Site Donor
 
Posts: 8968
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section


Return to Beginners Questions



Who is online

Users browsing this forum: No registered users and 28 guests

x