Ozito 350w

Just starting out and need some advise? then post it in here.

Ozito 350w

Postby MattSmith » Sat Dec 31, 2022 7:13 am

Before I go and buy an Ozito 350w pump I thought I'd ask if people think it would handle this setup:

I have hot/cold mains water in my garage to run into the still (I spec'd it for brewing when we built the house) so am planning on using that as the source. I was planning on running the outlet to a wheelie bin and then pumping from the bin back a 3000lt water tank. Top of the tank is about 1.6m off the ground and approx 20m away.

Is the Ozito likely to handle that?
MattSmith
Site Donor
 
Posts: 66
Joined: Tue Dec 20, 2022 9:53 pm
Location: Sydney, NSW
equipment: FSD 50L Milk Can
FSD 4" pot (3" PC) with packed section & RC
Still Spirits Air Still

Re: Ozito 350w

Postby The Stig » Sat Dec 31, 2022 7:43 am

I think it will.
I e been using one for about $ years now.
Mine sits in a spa, pumps around 15m to the still and lifts about 2m high to the condensers then back to the spa.
The Stig
Site Nerd
 
Posts: 18222
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: Ozito 350w

Postby MattSmith » Sat Dec 31, 2022 8:18 am

That's good enough for me, thanks :handgestures-thumbupleft:
MattSmith
Site Donor
 
Posts: 66
Joined: Tue Dec 20, 2022 9:53 pm
Location: Sydney, NSW
equipment: FSD 50L Milk Can
FSD 4" pot (3" PC) with packed section & RC
Still Spirits Air Still

Re: Ozito 350w

Postby dazzerthemighty » Sat Dec 31, 2022 9:12 pm

Seriously if you give it a larger diameter pipe up to a 40mm drain pipe to send water down you will be surprised just how quick and far it will send it with little issue..
it did us extremely well during our Brizzy floods.

Got to say initially I wasn't impressed when hooked to a 13mm garden hose or 19 -25mm irrigation pipe, the Pump was choked on trying to squeeze it down the smaller diameter pipe, with a lot of back pressure.
though you may want to include a check valve on the outlet to prevent it back flowing back into the sump, though that may not be an issue for everyone.
dazzerthemighty
Site Donor
 
Posts: 95
Joined: Sat Oct 03, 2015 11:52 am
equipment: 2"Nixon Head, 2" Pot-Head & 2" Condenser on a 50Lt keg boiler with 2x 2400wt elements, Power controller


Return to Beginners Questions



Who is online

Users browsing this forum: No registered users and 63 guests

x