Aussiedistiller, Home Distilling, Moonshine, Home Brew

HAVE A 50LTR BOILER IS IT OK JUST TO PUT 25LTR OF WASH IN OR WONT THIS WORK USING REFLUX STILL.BE KIND TO ME

YES IT WILL BE OK. WHY ARE WE SHOUTING!. I'm a little worried your doing a run and don't know how much volume you need in the boiler :wtf:

i just didnt wanna do a 50ltr run and waste it if it didnt go rite.beeing my first time, but all sounds good cheers.and im deaf

as long as the elements covered by the end of the run you will be fine. If on gas that doesnt matter you could do 10lts and prob get away with it but may scorch it

yeah i got electric element, well aware element to be covered . i work away so have limited time as well

kelbygreen wrote:as long as the elements covered by the end of the run you will be fine. If on gas that doesnt matter you could do 10lts and prob get away with it but may scorch it

How far above the bottom of a 50ltr keg would you have the element

still investigating i havnt fitted it in yet but if some one can advise me that would be handy

I run gas so cant say but at a guess 40mm would be alright you dont want it to touch the bottom of coarse

yeah i was thinking 50mm but same not touching bottom

maybe element will dictate height from the fitting and give clearance

as low as practical works, anywhere between the base and first rib.... it's not rocket science :laughing-rolling:

yeah you dont want it on the folds ether 8-}

thanks for the advise sounds good