Sourcing Parts

[crikko]

Hi guys,

I'm having trouble sourcing parts to make a 2" bokakob reflux. I'm in Bunbury WA.

I've got some 2" stainless steel for the column from my brother in law who can weld it all up for me, but I can't find any 1/4" copper for the coil that's in my price range. Tradelink quoted me $21 a metre, and another mob was $100+gst for a 30m coil, but wouldn't cut it down.

Also having trouble finding a keg or similar as a boiler.

The wife wasn't too keen on me building one at all, and hasn't allowed me much of a budget to get it done, so the cheaper the better!

Regards,

Chris

[Cane Toad]

Hi Chris,I'm sure that one of the WABS fraternity will be able to help you out,do you get up to Perf very often,the shopping may be cheaper there :handgestures-thumbupleft: :handgestures-thumbupleft:
PS was gunna cut loose about flanno's being on sale next week etc,but thought seeing as you are only new I'd let you settle in first :laughing-rolling: :laughing-rolling:

[MacStill]

already told you bout kegs in your other post ;-)

[crikko]

Hey Mac, must have missed your post on the other thread, sorry. I dont go to perth often, but up in mandurah quite a bit. I've been doing searches on gumtree and ebay, but havent found any yet

[MacStill]

You'll catch on :))

Let me know if you get stuck, I know a fella here in Perth that would have a few.

Actually I know a fella who probably has everything you need, but he's a bit far from you up here in Perth :laughing-rolling:

[googe]

f f s http://aussiedistiller.com.au/webstore/ :laughing-rolling:

[fizzydrink]

hey mate, masters has cheap soft copper, not sure if one in bunbury though. I paid about 17 for 3m. there knowledge isn't great though. I asked the chick on the trade desk if they had copper pipe. she asked me what it was made of..ffs!

[fizzydrink]

f f s webstore/ :laughing-rolling:

Googe. on that link a thumper still is 0.00 do you reckon they'd honour that price Mac?

[MacStill]

f f s webstore/ :laughing-rolling:

Googe. on that link a thumper still is 0.00 do you reckon they'd honour that price Mac?

Read the description ;-)

[googe]

f f s http://aussiedistiller.com.au/webstore/ :laughing-rolling:

Googe. on that link a thumper still is 0.00 do you reckon they'd honour that price Mac?

Score! I'll have half a dozen :D :laughing-rolling:

[googe]

Dam :sad:

[fizzydrink]

f f s webstore/ :laughing-rolling:

Googe. on that link a thumper still is 0.00 do you reckon they'd honour that price Mac?

Read the description ;-)

that's for custom. I'll have a standard lol :-D

[MacStill]

f f s webstore/ :laughing-rolling:

Googe. on that link a thumper still is 0.00 do you reckon they'd honour that price Mac?

Score! I'll have half a dozen :D :laughing-rolling:

No dramas :handgestures-thumbupleft:


thump still description here

This is an exquisitely designed and built Pot Still with Thumper, all copper construction by our master craftsman.

Custom designs are built to order & prices are POA

$750 each, I'll PM you my bank details :D

[Cane Toad]

:laughing-rolling: :laughing-rolling: :laughing-rolling:

[googe]

Well, that fucked that comeback :laughing-rolling:

[MacStill]

Well, that fucked that comeback :laughing-rolling:

Thought ya woulda learnt by now :violence-stickwhack:

Anyway Chris, as you can see we like to muck around & have a laugh here...it's not a bad place to hang out :handgestures-thumbupleft:

[MacStill]

Well, that fucked that comeback :laughing-rolling:

Thought ya woulda learnt by now googe :violence-stickwhack:

Anyway Chris, as you can see we like to muck around & have a laugh here...it's not a bad place to hang out :handgestures-thumbupleft:

[googe]

Well, that fucked that comeback :laughing-rolling:

Thought ya woulda learnt by now googe :violence-stickwhack:

Anyway Chris, as you can see we like to muck around & have a laugh here...it's not a bad place to hang out :handgestures-thumbupleft:

After 8 months you still don't know me :teasing-nutkick:

[jasonc2861]

Hi guys,

I'm having trouble sourcing parts to make a 2" bokakob reflux. I'm in Bunbury WA.

I've got some 2" stainless steel for the column from my brother in law who can weld it all up for me, but I can't find any 1/4" copper for the coil that's in my price range. Tradelink quoted me $21 a metre, and another mob was $100+gst for a 30m coil, but wouldn't cut it down.

Also having trouble finding a keg or similar as a boiler.

The wife wasn't too keen on me building one at all, and hasn't allowed me much of a budget to get it done, so the cheaper the better!

Regards,

Chris

Looking for a keg mate,just have a look behind condelloes in withers,theres about 30 of them sitting there doing nothing.. ;-) one rolled of the other day,,caught it halfway down the rd. ;-) :D

[googe]

Illegalities will bite ya in the arse, karmas a Butch ;-)