new pot still

[ozybottler]

just made my pot still with a thumper i think its running to fast its a small steam not drips any advice :think:

[Sam.]

What diameter is it?

What heat you throwing at it?

What wash you running?

Doing a spirit or strip run?

How many Litres per Hour?

These things help ;-)

[Kimbo]

Hi Ozy, as Sam said. Any extra info would be really helpful. :handgestures-thumbupleft:

[SBB]

If your doing a spirit run a thin stream is ok, though it would be handy to be able to go slower while taking off the fores and heads.

[ozybottler]

sorry :angry-banghead: :oops: the specs are
2" going into 3/4" into thumper then 1/2" into the worm wich is 3m of pipe coild
1400w heating element in a 50l keg
did rum wash
and maybe 1l per hour
does that shed any light

[ozybottler]

and the collum is about 400 high

[Kimbo]

That seems fine to me mate,
With running 1400w I dont think you will be able to go too fast :handgestures-thumbupleft:

[ozybottler]

i was thinking thumper may be to close its only short run to it

[Bushy]

Won't matter. My thumpers are only six inches apart :-D

[Dominator]

1l per hour out if a 2" column is fine.


Sent from my iPhone using Tapatalk 2

[ozybottler]

thanks people the final product tasted great anyway and got around 73% most of the run :clap: :text-thankyoublue:

[Andy]

thanks people the final product tasted great anyway and got around 73% most of the run :clap: :text-thankyoublue:

gotta be happy with that! :)