Pure still kits - plastic collection...?

Discuss safety issues here.

Re: Pure still kits - plastic collection...?

Postby Hawkeye » Tue May 19, 2015 7:59 pm

Zaximus wrote:"We are all born ignorant, but one must work hard to remain stupid", Benjamin Franklin

:ugeek:



Think there was another one that went 'The difference between ignorance and stupidity is that ignorance can learn, but you can't teach stupid.'
Hawkeye
 
Posts: 94
Joined: Sun Apr 12, 2015 11:01 am
Location: Hobart
equipment: 4 inch, 4 bubble plate on a 50L keg with 500mm packed section.

Re: Pure still kits - plastic collection...?

Postby Irritable » Wed May 20, 2015 8:37 am

I see that Ezy Filtration, Pure Stills, etc ALL state that the filtration process HAS to be conducted at under 50% ABV.
They state that this is because of the Carbon Filter not being able to handle the higher ALC content.

I am wondering if this is in fact the case - could this be because the Ezy / Pure etc do in fact utilise platic containers to hold the liquid whilst filtration takes place or is it really the carbon not handling high ABV ?

Si
Irritable
 
Posts: 141
Joined: Wed May 13, 2015 3:26 pm
equipment: Super Reflux that aint so super but aint so reflux :)

Re: Pure still kits - plastic collection...?

Postby Zak Griffin » Wed May 20, 2015 9:03 am

There is some science behind carbon filtration working best at 40%ABV, but I'm not sure what it is.

Your spirit should never touch plastic, ever. Simple as that.
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Pure still kits - plastic collection...?

Postby hillzabilly » Wed May 20, 2015 9:04 am

On another note ,I do not like the idear of 4-5lt of high proof spirit right next to ya still,wich if you where doing a spirit run it would be even more ,this is an added danger or risk to me ,500ml will make a nice little fire but 5000ml ,no thanks .we are all capable of accidents ,and to me this post is about safety.On a larger scale this method would not be practical ,so to me it teache's bad habits wich this hobby is not very forgiving of.stay safe .cheers hillzabilly ;-)
hillzabilly
 
Posts: 1509
Images: 0
Joined: Sun Jun 10, 2012 3:18 pm
Location: PERTH WEST AUSSIE
equipment: 10 gallon OZARK pot still ,2inch and 3inch Nixon Stone coloum stills ,10 and 18 gal beer keg boilers,5gal thumper keg.And the one and only 4" Five Star Southern Cross .

Re: Pure still kits - plastic collection...?

Postby joel0395 » Thu Jul 16, 2015 9:26 pm

On this note, is it okay to store low wines from stripping run in plastic water jerry cans, i have not yet started stilling but in the planning stages. Or can anyone else recommend a practical solution to be able to store 25 litre?
joel0395
 
Posts: 41
Joined: Mon Feb 02, 2015 11:18 am
Location: Southern tablelands nsw
equipment: 3" Boka

Re: Pure still kits - plastic collection...?

Postby Zak Griffin » Thu Jul 16, 2015 10:00 pm

No mate, nothing that comes out of your still should go anywhere near any plastic.

A 50L stainless beer keg makes pretty good storage :handgestures-thumbupleft: before I had spare kegs I just used 1L Jim Beam bottles though.
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Pure still kits - plastic collection...?

Postby Sam. » Thu Jul 16, 2015 10:03 pm

policy on plastics

Stainless kegs are good storage or big glass demis :handgestures-thumbupleft:

Edit: Zak beat me to it :text-+1:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Previous

Return to Safety Discussion



Who is online

Users browsing this forum: No registered users and 12 guests

x