Keg factory

Discuss everything about oaking and aging here

Keg factory

Postby Andy » Tue Aug 20, 2013 3:40 pm

Any one used one of these before?

http://www.thekegfactory.com.au/kegtype ... piritkegs/

just wondering on the quality
Andy
 
Posts: 1466
Joined: Tue Aug 28, 2012 6:49 pm
Location: SOR, Perth
equipment: Copper Potstill on a 50L keg boiler with a 2200w element.
Doesn't get more simple then that

Re: Keg factory

Postby crow » Tue Aug 20, 2013 4:17 pm

No but the Barossa is full of cooperages I'd say they would be as good as any. Not that cheap for such a small keg but meh prolly value for money. We got a resident cooper here that may do you a better deal ;-) but if you need it now check around the prices. Just around the Barossa there's Heinrichs, Tubbs, Johns,SA cooperage and I think at least 4 or 5 other major ones I can't think of now plus a few back yard one man shows :handgestures-thumbupleft:
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Keg factory

Postby kingy » Tue Aug 20, 2013 7:39 pm

I've got a 20litre one from the keg factory it's awesome I store port in it and top up maybe once a fortnight as I drink from the tap.

Best port I've ever had and its only been filled for 2 years. Bloody beautiful
kingy
 
Posts: 224
Joined: Fri Mar 01, 2013 2:32 pm
equipment: 4inch modular up to 5 plates and a packed section
50 litre 2x 2400w elements boiler
100 litre E herms brewery with a 130litre gas boiler

Re: Keg factory

Postby Sam. » Tue Aug 20, 2013 8:31 pm

It's also the same place you can get the Nadalie products from like one of the group buys :handgestures-thumbupleft:

I was given a 9L barrel from there for a birthday and I can't fault the quality.
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.


Return to Oaking and Aging



Who is online

Users browsing this forum: No registered users and 47 guests

x