OAKING JAR DISPENSERS 11.3 LITRES

Discuss everything about oaking and aging here

OAKING JAR DISPENSERS 11.3 LITRES

Postby CHEROKEE » Sun Jun 08, 2014 7:53 pm

I came across these large glass beverage dispensers on Ebay, I’m sure everyone has seen them
but I thought I’d buy a couple and check them out. Their from a Victorian company who offer
free shipping (in Australia) they were packed very well and survived the journey to W.A. in
excellent condition. I might have to replace the spigot with a HBS one but apart from that I think
they'll do the job. They cost a fraction under $90.00 each. Cheers :handgestures-thumbupleft:
You do not have the required permissions to view the files attached to this post.
CHEROKEE
 
Posts: 222
Joined: Mon Jun 10, 2013 11:10 pm
Location: Perth Riverton Western Australia
equipment: FSD Mac-4 SSG 4 Plate 6 inch Bubbler on a 80 Litre, 6000 Watt Keg Boiler.
IBC cooling system utilising a 4 inch submersible bore pump.

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby Andy » Sun Jun 08, 2014 7:57 pm

u will most certainly need to replace that tap with something :handgestures-thumbupleft:
Andy
 
Posts: 1466
Joined: Tue Aug 28, 2012 6:49 pm
Location: SOR, Perth
equipment: Copper Potstill on a 50L keg boiler with a 2200w element.
Doesn't get more simple then that

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby pulsetech » Sun Jun 08, 2014 8:02 pm

Whats the tap made out of. It looks like stainless in the pics but im guessing its plastic
pulsetech
 
Posts: 425
Joined: Sun May 11, 2014 1:40 pm
equipment: 4"

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby CHEROKEE » Sun Jun 08, 2014 8:17 pm

Hello pulsetech.......It's a stainless steel spigot, I'm just assuming the seal behind it isn't rated for alcohol.
Apart from that it's glass and a decent size for oaking at 65%. Cheers :handgestures-thumbupleft:
CHEROKEE
 
Posts: 222
Joined: Mon Jun 10, 2013 11:10 pm
Location: Perth Riverton Western Australia
equipment: FSD Mac-4 SSG 4 Plate 6 inch Bubbler on a 80 Litre, 6000 Watt Keg Boiler.
IBC cooling system utilising a 4 inch submersible bore pump.

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby 1 2many » Sun Jun 08, 2014 8:18 pm

I bought this tap and it is good quality .
http://www.ebay.com.au/itm/Standard-Hom ... 9ea&_uhb=1

Cheers. :handgestures-thumbupleft:
1 2many
Lifetime Member
 
Posts: 4215
Joined: Sun Jan 27, 2013 6:08 am
Location: Where the sun shines
equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby CHEROKEE » Sun Jun 08, 2014 8:25 pm

Thanks for that.......... 1_ 2many, problem solved. Cheers :handgestures-thumbupleft:
CHEROKEE
 
Posts: 222
Joined: Mon Jun 10, 2013 11:10 pm
Location: Perth Riverton Western Australia
equipment: FSD Mac-4 SSG 4 Plate 6 inch Bubbler on a 80 Litre, 6000 Watt Keg Boiler.
IBC cooling system utilising a 4 inch submersible bore pump.

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby Sam. » Sun Jun 08, 2014 11:21 pm

I have the same jar, I did the Teflon tape replacement for the seal on the lid and tap, the test I did with the seal in high proof was off that jar will see if I can find the link :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby CHEROKEE » Sun Jun 08, 2014 11:39 pm

Thank you............ sam_and_liv, If they work out I'll need another 8 of them, just to keep up. Cheers :handgestures-thumbupleft:
CHEROKEE
 
Posts: 222
Joined: Mon Jun 10, 2013 11:10 pm
Location: Perth Riverton Western Australia
equipment: FSD Mac-4 SSG 4 Plate 6 inch Bubbler on a 80 Litre, 6000 Watt Keg Boiler.
IBC cooling system utilising a 4 inch submersible bore pump.

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby res » Mon Jun 09, 2014 12:15 am

CHEROKEE wrote:Thank you............ sam_and_liv, If they work out I'll need another 8 of them, just to keep up. Cheers :handgestures-thumbupleft:


How about a bigger barrel? Cheaper and hard to beat. Although maybe not so much if you doing lots of different spirits.
res
 
Posts: 445
Joined: Thu Aug 22, 2013 10:12 pm
Location: Melbourne
equipment: Custom 4", 5 plate FSD bubbler, 600mm packed section.
50lt keg boiler with 2x 2400w elements
5lt copper pot still

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby Sam. » Mon Jun 09, 2014 7:43 am

I only use one to keep 40% neutral in :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: OAKING JAR DISPENSERS 11.3 LITRES

Postby Timmsy » Mon Jun 09, 2014 8:52 am

528ec2036562c.jpeg



http://www.neds.net.au/shop/category/ca ... ?start=150

ay guys I dont know if u had neds In ur states but I buy 5ltr mason jars for $10 and thay have these 10ltr jars for $29
You do not have the required permissions to view the files attached to this post.
Timmsy
 
Posts: 188
Joined: Sun May 12, 2013 9:53 pm
Location: South Australia/Parafield Gardens
equipment: Amateur distiller.
T500 reflux
2" pot still 1500mm high sitting on a 50ltr electric keg boiler
50ltr gatorade mash tun, 25ltr HLT


Return to Oaking and Aging



Who is online

Users browsing this forum: No registered users and 91 guests

x