Storage

Parrots beaks, valves, condensers, and all other hardware for stilling.

Storage

Postby Listo » Sat Sep 08, 2018 8:39 pm

I don’t know if everyone already knows about these, but I thought I’d put them up for a heads up anyway. Now I’ve started getting right into my brewing, I found these to be pretty good. The idea is to have one for low wines & one for feints for each flavour brew as I get more organised.
You do not have the required permissions to view the files attached to this post.
Listo
Site Donor
 
Posts: 161
Joined: Sat Mar 15, 2014 12:45 pm
Location: Roma Qld
equipment: 5Star 4” Modular Pot Still

Re: Storage

Postby Listo » Sat Sep 08, 2018 8:41 pm

I forgot to put, I just searched “stainless steel storage drum” on eBay
Listo
Site Donor
 
Posts: 161
Joined: Sat Mar 15, 2014 12:45 pm
Location: Roma Qld
equipment: 5Star 4” Modular Pot Still

Re: Storage

Postby j0sh2008 » Sat Sep 08, 2018 9:37 pm

They look good :handgestures-thumbupleft:
j0sh2008
 
Posts: 231
Joined: Mon Dec 05, 2016 1:07 am
Location: Brisbane
equipment: 4" 5star still - 4 plates + 500mm packed section
100L milk can boiler - 2400W & 3600W FSD elements.
2 X 1000L IBC - Recirculating water

Re: Storage

Postby EziTasting » Sat Sep 08, 2018 10:33 pm

Awesome share!

I’m going to convert a fire extinguisher into a storage device looking to buy some 2” ferrule, clamp, seal and blank lids to solder to it... hoping to save some $$ AND learn to solder at the same time...
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Storage

Postby dans.brew » Sat Sep 08, 2018 10:36 pm

Nice :handgestures-thumbupleft:
Sure would beat 2ltr flagons laying around everywhere, but i did get them for nothing so can't really complain.
dans.brew
 
Posts: 987
Joined: Fri Oct 07, 2016 10:26 pm
Location: Victoria- Northern Wimmera
equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler

Re: Storage

Postby EziTasting » Sat Sep 08, 2018 11:35 pm

Hah, only thing I need to pay for are the ferrules, clamps & Blancs. Hoping to get a kit...
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Storage

Postby dans.brew » Sun Sep 09, 2018 12:02 am

EziTasting wrote:Hah, only thing I need to pay for are the ferrules, clamps & Blancs. Hoping to get a kit...

Free is always good... you need to make the original tap and hose clamp on, chuck some air in it and it would bring a whole new meaning to "spirit on tap" :laughing-rolling:
dans.brew
 
Posts: 987
Joined: Fri Oct 07, 2016 10:26 pm
Location: Victoria- Northern Wimmera
equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler

Re: Storage

Postby EziTasting » Sun Sep 09, 2018 8:13 am

Hah, carbonated Whisky, just add water!

My plan is to set the young teller loose with an expired (and free extinguisher), let him have some fun before I take the hose assembly off and clean it out with detergent and warm water, strip the paint and then silver-solder a 2” ferrule on (cut the hole before or after, not sure yet)...

If I get it right, it’ll be a nice medium sized storage unit to add to my kegs... should go for barrels, I know!
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Storage

Postby dans.brew » Sun Sep 09, 2018 7:20 pm

Nice Ezi... you'll be the best dad ever! :handgestures-thumbupleft:
dans.brew
 
Posts: 987
Joined: Fri Oct 07, 2016 10:26 pm
Location: Victoria- Northern Wimmera
equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler

Re: Storage

Postby EziTasting » Sun Sep 09, 2018 8:04 pm

Just wait until I provide all the grog for his 18th birthday party!
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Storage

Postby j0sh2008 » Sun Sep 09, 2018 9:05 pm

EziTasting wrote:Just wait until I provide all the grog for his 18th birthday party!


:handgestures-thumbupleft:


Ezi , it’s my birthday soon also. Can I have some drinks? Some of that AG stuff you have been doing sounds good :laughing-rolling:
j0sh2008
 
Posts: 231
Joined: Mon Dec 05, 2016 1:07 am
Location: Brisbane
equipment: 4" 5star still - 4 plates + 500mm packed section
100L milk can boiler - 2400W & 3600W FSD elements.
2 X 1000L IBC - Recirculating water

Re: Storage

Postby EziTasting » Mon Sep 10, 2018 5:32 pm

j0sh2008 wrote:
EziTasting wrote:Just wait until I provide all the grog for his 18th birthday party!


:handgestures-thumbupleft:


Ezi , it’s my birthday soon also. Can I have some drinks? Some of that AG stuff you have been doing sounds good :laughing-rolling:



Hey, I said "Booze", not Whisky! :hand:


:obscene-birdiedoublered:
Last edited by EziTasting on Mon Sep 10, 2018 5:33 pm, edited 1 time in total.
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser


Return to Accessories



Who is online

Users browsing this forum: No registered users and 12 guests

x