Weldless bulkhead

Parrots beaks, valves, condensers, and all other hardware for stilling.

Weldless bulkhead

Postby Paul_AI_Notabot » Fri Nov 16, 2018 10:03 pm

Hello good people, I'm looking into using a weldless bulkhead to attach my condenser to my boiler can anyone recommend anything like this and should I do it.
I'm connecting a liebig condenser to a removable lid. The start of the column is 5cm and the hole in the lid of the boiler is 5.8cm.
I'd perferably like to use a 1-1/2 tri clover connection between the bulkhead and column.
A company has a 2 inch weldless tri clover bulkhead
Thanks
Last edited by Paul_AI_Notabot on Fri Nov 16, 2018 10:06 pm, edited 2 times in total.
Paul_AI_Notabot
 
Posts: 6
Joined: Tue Oct 02, 2018 5:27 pm
equipment: Building a liebig condenser to attach to a t500

Re: Weldless bulkhead

Postby bluc » Fri Nov 16, 2018 11:26 pm

i used one 50mm on a t500 boiler :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Weldless bulkhead

Postby Paul_AI_Notabot » Sat Nov 17, 2018 1:29 am

Thanks mate
Paul_AI_Notabot
 
Posts: 6
Joined: Tue Oct 02, 2018 5:27 pm
equipment: Building a liebig condenser to attach to a t500

Re: Weldless bulkhead

Postby scythe » Sat Nov 17, 2018 11:25 am

5star do a t500 adaptor which i think might be what your after.
It is a 2inch triclover connection.
scythe
 
Posts: 1860
Joined: Thu Nov 14, 2013 6:34 am
Location: Central West NSW
equipment: Dreaming of a 4" bubbler

Re: Weldless bulkhead

Postby Paul_AI_Notabot » Sat Nov 17, 2018 12:38 pm

Thanks mate
Paul_AI_Notabot
 
Posts: 6
Joined: Tue Oct 02, 2018 5:27 pm
equipment: Building a liebig condenser to attach to a t500

Re: Weldless bulkhead

Postby Yellow vk » Wed Jul 17, 2019 7:38 pm

Check EBay mate, you can get 1.5 " weldless bulkheads
Yellow vk
 
Posts: 1
Joined: Sun May 22, 2016 1:10 pm
Location: Central Queensland
equipment: 2" pot still on 25l boiler. 2" cm reflux coloum. Soon to be upgraded.


Return to Accessories



Who is online

Users browsing this forum: No registered users and 7 guests

x