Aussiedistiller, Home Distilling, Moonshine, Home Brew

Hello good people, I'm looking into using a weldless bulkhead to attach my condenser to my boiler can anyone recommend anything like this and should I do it.
I'm connecting a liebig condenser to a removable lid. The start of the column is 5cm and the hole in the lid of the boiler is 5.8cm.
I'd perferably like to use a 1-1/2 tri clover connection between the bulkhead and column.
A company has a 2 inch weldless tri clover bulkhead
Thanks

i used one 50mm on a t500 boiler :handgestures-thumbupleft:

Thanks mate

5star do a t500 adaptor which i think might be what your after.
It is a 2inch triclover connection.

Thanks mate

Check EBay mate, you can get 1.5 " weldless bulkheads