parrot

Parrots beaks, valves, condensers, and all other hardware for stilling.

parrot

Postby googe » Sun Aug 05, 2012 11:30 am

Hi all, had a go at some parrots yesterday and today. Let me know if you think they'll work ok. The tap one is a bit hard to eplain, unless you know what the inside of an old tap looks like. Basically the goodness flows in the feeder and down the tube and floods the outlet of the tap. Yet to be tested on the still.
You do not have the required permissions to view the files attached to this post.
googe
 

Re: parrot

Postby emptyglass » Wed Aug 08, 2012 2:36 pm

Hard to tell from the pics, but the centre tube should be a bit higher than the collector so you can read the alcometer side on. You need to be able to read on top of or under the meniscus, depending on where the alcometer says to.

10 points for inventivness, would be cool to see you get the tap one running.
emptyglass
 

Re: parrot

Postby googe » Thu Aug 09, 2012 12:46 pm

Thanks mate, didnt think of that! :doh: . I like the tap one to, there cool looking :). If i can get it to work this way i might try incorperating it into the liebig.
googe
 


Return to Accessories



Who is online

Users browsing this forum: No registered users and 35 guests

x