My new condenser

[MacStill]

Here's a few pics of a new 2.5" shotty I built myself yesterday, it got 9 x 3/8 tubes inside and will be going on my new rig once it's built.

Product out end.

IMG_1121.JPG

Product in end before soldering

IMG_1123.JPG

After soldering

IMG_1126.JPG

Ferrules attached

IMG_1127.JPG

IMG_1128.JPG

[MacStill]

Ready to rock n roll :dance: :happy-partydance: :dance:

IMG_1129.JPG

IMG_1132.JPG

[Goldie]

Thumbs up, she's another shiny one!

[Hockadays]

Nice, is that a 2" to 1" reducer on the end with a 3/4 triclover soldered in?

[MacStill]

Nice, is that a 2" to 1" reducer on the end with a 3/4 triclover soldered in?

Thanks

2" x 3/4" reducer with a 3/4" tri clamp ferrule :handgestures-thumbupleft:

[ticknaylor]

Nice condesor what type of still is that going on? Did you go to still building university hahaha, I'd hate to think what your yearly part budget is :))

[MR-E]

I like it :D , I have 5 x 3/8" tubes in 2" & I only need a trickle of cooling water, I think you'll like the result :handgestures-thumbupleft:

[MacStill]

Nice condesor what type of still is that going on?

It's going on a new bubble column I'm working on, should be ready early to mid January :happy-partydance:

[MacStill]

I like it :D , I have 5 x 3/8" tubes in 2" & I only need a trickle of cooling water, I think you'll like the result :handgestures-thumbupleft:

Yeah my other shotty is a 3" with 5 x 1/2 tubes and works perfectly, I just wanted something a little more compact for my new rig :D

[MacStill]

So maybe I should rename this post 8-}

Here's another condenser and some plates for the new rig.

Just gotta finish the plates and all the important bits are done :happy-partydance:

IMG_1137.JPG

I'm gunna miss the Dragon Slayer but there's better things on the horizon, and yes I'm without a working still of my own again :))

[emptyglass]

Nice looking gear, mac. :banana-rainbow:

[MacStill]

wait till ya see what they're going on :happy-partydance: :music-deathmetal: :happy-partydance:

[MR-E]

wait till ya see what they're going on :happy-partydance: :music-deathmetal: :happy-partydance:

Your such a tease :romance-heartbeating:

[Aussiedownunder01]

Good stuff whats the grid patten in the plates

[MacStill]

Good stuff whats the grid patten in the plates

squares :handgestures-thumbupleft: ;-)

[Cane Toad]

:shhh: :shhh: :D :D :D

[Aussiedownunder01]

Good stuff whats the grid patten in the plates

squares :handgestures-thumbupleft: ;-)

Good thanks for sharing :))

[MacStill]

wait till ya see what they're going on :happy-partydance: :music-deathmetal: :happy-partydance:

Your such a tease :romance-heartbeating:

All will be revealed in good time mate ;-)

[Aussiedownunder01]

Nice how long is it

[MacStill]

Overall it's 500mm