Pumps rated to 100C

Parrots beaks, valves, condensers, and all other hardware for stilling.

Pumps rated to 100C

Postby SBB » Tue May 13, 2014 7:50 pm

Been poking around the different Distilling Forums tonight seeing whats of interest and found these.....maybe ya seen them, maybe not.
Gotta be a few uses for these in distilling and they don't cost an arm and a leg.
Shame they are in Hong Kong.
http://www.ebay.com.au/itm/DC-12V-24V-Solar-Hot-Water-Circulation-Pump-Brushless-Motor-6-5L-Min-10L-Min-/191065696086?pt=LH_DefaultDomain_15&var&hash=item2c7c672756&_uhb=1
SBB
Lifetime Member
 
Posts: 2450
Joined: Mon Mar 21, 2011 8:12 pm
Location: Northern NSW
equipment: (The Pelican) a 2 inch pot / stripper on 25L electric boiler interchangable with T500 reflux still...... 2 1/2 inch pot still on 50L keg (gas burner).....
3 inch Boka (half share with Draino),...... 4 inch 4 plate perforated plate Bubbler

Re: Pumps rated to 100C

Postby Smbjk » Tue May 13, 2014 7:58 pm

They look good. Been looking at these myself for my ag rig. Guys on ag forum say there not bad just make sure they are food safe. Some of them are rated for 20000+hours go figure :think:
Smbjk
 
Posts: 863
Joined: Fri Dec 14, 2012 11:22 pm
Location: Brisvegas
equipment: 50lt keg boiler with 2"boka
3" bubbler with 4 perf plates
All grain brewery ( Small Scale ) Keg Fridge
50lt keg boiler 2x2400w elements
Control box
Building fund is depleted

Re: Pumps rated to 100C

Postby sp0rk » Wed May 14, 2014 7:59 am

Some guys over on AHB say they gum up really quickly and can seize at higher temps, others have had success, though
I've got the older version of this (The green one from Keg King)
http://www.ebay.com.au/itm/809-FOOD-GRA ... 7df&_uhb=1
I've had no problems with it pumping boiling wort so far, I'm yet to strip it down to clean though
sp0rk
 
Posts: 697
Joined: Sat Oct 26, 2013 9:20 am
Location: Mulletbrook
equipment: 2.5" pot still
2.5" shotty PC
50L boiler
2.5" Tee Plate Boka
4" 4 plate glass bubbler in the build stage

Re: Pumps rated to 100C

Postby home_brewer » Wed May 14, 2014 10:15 am

have a look at the mk11 pumps at kegking i have been using 1 on my rims system for a year now with no probs
http://kegking.com.au/Downloads/Catalog ... 20List.pdf
home_brewer
 
Posts: 96
Joined: Mon May 14, 2012 10:30 am
Location: brisvagas
equipment: 2in pot
in progress
2"vm
4" bubbler
bigger boiler maby 80l


Return to Accessories



Who is online

Users browsing this forum: No registered users and 68 guests

x