My first leibig product condensor

Parrots beaks, valves, condensers, and all other hardware for stilling.

My first leibig product condensor

Postby bradsgonetrekkin » Sun Aug 28, 2011 9:35 pm

Put this together today as well. Still to be soldered but seems to all fit ok.

The condensor is 1/2 inch copper internal with a 3/4 outer jacket. The outer jacket is around 630mm long.

Connection to still will be via a 3/4 ss ferrule and triclamp connection.

Water inlets and outlets via 1/2 -1/2 - 3/4 tees, with a small 1/2 copper stub in the tees to be soldered onto a 15mm brass threaded tube bush.

When hooked up to the pot head inlets and outlets will have a 20 - 15mm brass threaded reducing bush screwed on so a standard hose connector fitting can be used. For reflux the outlet of the leibig to the inlet of the reflux condensor coil will use a standard 1000mm long "cistern type" water connection line with 1/2 inch fittings.
You do not have the required permissions to view the files attached to this post.
Last edited by bradsgonetrekkin on Fri Feb 10, 2012 5:32 am, edited 1 time in total.
bradsgonetrekkin
 
Posts: 184
Joined: Wed Apr 13, 2011 7:44 pm
Location: newcastle nsw
equipment: 18 gallon (80litre) ss keg boiler with 2400w and 1200w elements
65-50-35-19mm copper pot head/ stripper
2m high 65-50mm copper vapour management column with cross flow condensor head
630mm long 3/4 over 1/2 inch leibig and 32mm outer, 1/2 inch inner 'double barrel' interchangable condensors

Re: My first leibig product condensor

Postby MacStill » Mon Aug 29, 2011 5:55 am

Hi BGT,

That looks excellent so far, the braided hoses are a nice touch too and wont kink once they get hot.... good thinking :clap:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P


Return to Accessories



Who is online

Users browsing this forum: No registered users and 8 guests

x