$2 shop Copper scrubbers

Parrots beaks, valves, condensers, and all other hardware for stilling.

$2 shop Copper scrubbers

Postby res » Fri Jul 04, 2014 1:03 am

Found these at my local, $3 for 70 grams. Any one use em? :think:
You do not have the required permissions to view the files attached to this post.
res
 
Posts: 445
Joined: Thu Aug 22, 2013 10:12 pm
Location: Melbourne
equipment: Custom 4", 5 plate FSD bubbler, 600mm packed section.
50lt keg boiler with 2x 2400w elements
5lt copper pot still

Re: $2 shop Copper scrubbers

Postby Sam. » Fri Jul 04, 2014 6:39 am

Soak them in water and see if they rust before using them :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: $2 shop Copper scrubbers

Postby res » Fri Jul 04, 2014 5:28 pm

Doesn't look good for the bargain scrubbers :handgestures-thumbdown: . More reading suggests true copper wont attract a magnet, and these sure do. So likely just copper coated steel or iron. :angry-banghead:
No bother I needed a new dish scrubber 8-} .
res
 
Posts: 445
Joined: Thu Aug 22, 2013 10:12 pm
Location: Melbourne
equipment: Custom 4", 5 plate FSD bubbler, 600mm packed section.
50lt keg boiler with 2x 2400w elements
5lt copper pot still

Re: $2 shop Copper scrubbers

Postby Sam. » Fri Jul 04, 2014 8:32 pm

Like most things in this world you get what you pay for ;-)
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: $2 shop Copper scrubbers

Postby AussieDistiller1989 » Sun Jul 06, 2014 6:14 pm

And the worse thing is there not good scrubbers ether I used them in my commercial kitchen for a while they just fall apart :angry-banghead:
AussieDistiller1989
 
Posts: 83
Joined: Sun May 05, 2013 2:45 pm
Location: Victoria
equipment: 50lt pot still with a 30lt thumper with a
2" gooseneck and a Liebig


Return to Accessories



Who is online

Users browsing this forum: No registered users and 58 guests

x