Aussiedistiller, Home Distilling, Moonshine, Home Brew

Ok so with my boiler i intend to build a thumper its massive to say the least but im puttin it on a 80l boiler if thats any justifaction (probably still compensating)

Parts list
8 inch pipe 355mm high
8 inch ferrule 45mm high (its more like 8 1/4")
2 x 8" - 4" reducers 110mm high
Total height 620mm

Maybe 1 or 2 sight glasses i was tryn to figure out how to put a glass tube on the side for a height guage i was thinkin of gettin a 3/4 sight glass tube with a longer glass tube and threaded rod

Not sure on risers and downcomer size yet still tryn to nut that out

I have enough 4" to make the cap and 2.5" to make the riser and 1" for the downcomer
I have plenty of 3",2" and 3/4 to if im tryn to ova do it

The question i have is if my still is 4" will going back to 2" restrict flow ensayin that i will only have single 2" caps on my plates



Sorry bout the pic been sideways

With all these buids do you have any time for work :teasing-tease: :laughing-rolling:
Cool idea about the glass.
Go thumping ben :handgestures-thumbupleft:

haha yea, how many build threads are you working on at the moment :think:

Mate ive got heaps goin on

4 inch bubbler
80l keg
Thumper
4 inch pelican stripper
(But im settin up my weldin area so i can tig at nite while the kids are asleep)
Plus ive got a maverik styleside dualcab conversion
Staino sink with splash back
N my datto to get goin properly

And theres family time

So the misos gone out n the lil ones asleep so i go to tigin the top cone is on and the 4" & 8" ferrules have been tacked in place i need to drill/cut the holes for the riseramd downcomer amd tig the bottom cone onto the bottom ferrule

4 inch bubble cap 400mm high
2.5 inch riser 375mm high
3/4 inch downcomer (the old keg spear)
1 1/2 cap for the downcomer

that's not going to work, you need to research things a bit better 8-}

MacStill wrote:that's not going to work, you need to research things a bit better

:text-+1:

Meatheadinc wrote:

MacStill wrote:that's not going to work, you need to research things a bit better

:text-+1:

Why not? i know little to bothing about inline thumpers lol but im very curious :D

The downcomer needs to be lower than the riser.

Magnus wrote:The downcomer needs to be lower than the riser.

I know that bit... thought it was something elae i missed.

Only other thing is to stop vapour going up the downcomer with a bend or cap.