2" shotgun condenser length

[Magnus]

What would an ideal length for a 2" shotgun condenser?
Will be used on my 2" pot still on a 2000watt boiler.

Edit.. will have 5 or 7 0.5" tubes.

Thanks,
Mag

[TasSpirits]

Hi, my FSD 2" is 400mm, preforms very well, stripping @2400w on a 200L recirculating system the condensate comes out around 20'

Hope this is of some use

[Doubleuj]

You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long

[P3T3rPan]

You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long

Is that right

IMG_2052 (480x640).jpg

[P3T3rPan]

Mine at 600mm gives 20c distillate with 5Kw up it

[Magnus]

Thanks guys, I was thinking about 500-600mm long but just wanted to check. The circles in circles online app shows 5 tubes will fit easly too and if your all getting around 20c with 5 tubes than that's the go by the sounds.

[sp0rk]

I've got 7 x 1/2" in my 2.5" shotty at 500mm cooled length, I can have my 3 ring burner turned up full bore on my adjustable regulator and as long as I have a bit more than a dribble running through the shotty, it'll knock the vapour down and collect 13L+ per hour (never run it flat out for a long period before, wastes too much gas)
5 tubes at 500mm long should be more than enough

[Aussiedownunder01]

You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long

Is that right

IMG_2052 (480x640).jpg

Seeing that photo I would get 9 in there you only need 1/8 in between tubes

[rumdidlydum]

You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long

Is that right

IMG_2052 (480x640).jpg

Seeing that photo I would get 9 in there you only need 1/8 in between tubes

I got 7 in :happy-partydance:

[Doubleuj]

:shock: well I'll just get back in my box

[1 2many]

And 2.5" you can get 9 barrels. :teasing-neener:

[Doubleuj]

:laughing-rolling: and I can't even blame being drunk when I posted that, worst still my plans for my bubbler have a 5 barrel 2" shotgun :laughing-rolling: 8-}

[Magnus]

Just thinking, if I make it 5 tubes @ say 600-610mm long will it be good enough to use on a 4" bubbler I plan on making in the future?

[rumdidlydum]

:laughing-rolling: :laughing-rolling:
5 tubes is fine. You will only have a minute more water going throughput i teckonn. :D

[Magnus]

Cool thanks for all the comments, very much appreciated :)