Page 1 of 1
2" shotgun condenser length
Posted:
Thu Oct 15, 2015 1:56 pm
by Magnus
What would an ideal length for a 2" shotgun condenser?
Will be used on my 2" pot still on a 2000watt boiler.
Edit.. will have 5 or 7 0.5" tubes.
Thanks,
Mag
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 2:31 pm
by TasSpirits
Hi, my FSD 2" is 400mm, preforms very well, stripping @2400w on a 200L recirculating system the condensate comes out around 20'
Hope this is of some use
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 2:33 pm
by Doubleuj
You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 2:52 pm
by P3T3rPan
Doubleuj wrote:You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long
Is that right
IMG_2052 (480x640).jpg
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 2:58 pm
by P3T3rPan
Mine at 600mm gives 20c distillate with 5Kw up it
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 3:03 pm
by Magnus
Thanks guys, I was thinking about 500-600mm long but just wanted to check. The circles in circles online app shows 5 tubes will fit easly too and if your all getting around 20c with 5 tubes than that's the go by the sounds.
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 3:06 pm
by sp0rk
I've got 7 x 1/2" in my 2.5" shotty at 500mm cooled length, I can have my 3 ring burner turned up full bore on my adjustable regulator and as long as I have a bit more than a dribble running through the shotty, it'll knock the vapour down and collect 13L+ per hour (never run it flat out for a long period before, wastes too much gas)
5 tubes at 500mm long should be more than enough
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 4:34 pm
by Aussiedownunder01
P3T3rPan wrote:Doubleuj wrote:You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long
Is that right
IMG_2052 (480x640).jpg
Seeing that photo I would get 9 in there you only need 1/8 in between tubes
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 5:13 pm
by rumdidlydum
Aussiedownunder01 wrote:P3T3rPan wrote:Doubleuj wrote:You won't get 5 or 7 tubes in a 2 inch shotty. 4 would be the max. I'm making a 40mm shotty ATM with three 1/2inch tubes and it's about 600mm long
Is that right
IMG_2052 (480x640).jpg
Seeing that photo I would get 9 in there you only need 1/8 in between tubes
I got 7 in :happy-partydance:
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 6:01 pm
by Doubleuj
:shock: well I'll just get back in my box
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 6:04 pm
by 1 2many
And 2.5" you can get 9 barrels. :teasing-neener:
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 6:23 pm
by Doubleuj
:laughing-rolling: and I can't even blame being drunk when I posted that, worst still my plans for my bubbler have a 5 barrel 2" shotgun :laughing-rolling: 8-}
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 6:39 pm
by Magnus
Just thinking, if I make it 5 tubes @ say 600-610mm long will it be good enough to use on a 4" bubbler I plan on making in the future?
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 6:53 pm
by rumdidlydum
:laughing-rolling: :laughing-rolling:
5 tubes is fine. You will only have a minute more water going throughput i teckonn. :D
Re: 2" shotgun condenser length
Posted:
Thu Oct 15, 2015 7:36 pm
by Magnus
Cool thanks for all the comments, very much appreciated :)