Page 1 of 1

1/4 inch output needle valve for 2" boka

PostPosted: Tue Sep 12, 2017 11:06 am
by Nathan02
Hi guys,

Doing a 2" boka build. Chasing a 1/4 inch needle valve for the output pipe. Would anyone have a link or source i could reasonably priced i could get one from?

Many thanks,
Nathan

Re: 1/4 inch output needle valve for 2" boka

PostPosted: Tue Sep 12, 2017 12:16 pm
by PeterC
I got a 1/2" (DN15) needle valve to control my cooling water from eBay (China) and it was fine. I actually use a 1/8" needle valve on my 2" LM reflux still. It is a Swagelok but they are expensive (scrounged it from some old lab equipment). You could try this http://www.ebay.com.au/itm/1-4-915PSI-N ... SwUIhZZLn~
PeterC

Re: 1/4 inch output needle valve for 2" boka

PostPosted: Tue Sep 12, 2017 7:35 pm
by Kenster
Nathan, as Peter rightly said, once u start to trawl Fleabay, you will be able to find absolutely everything you will ever need, all at realistic prices. BUT, factor into the equation, one month before you receive the stuff.

Re: 1/4 inch output needle valve for 2" boka

PostPosted: Tue Sep 12, 2017 7:39 pm
by hillzabilly
I got a couple very well priced from FSD when they were over here ,try calling them for a price.cheers hillzabilly :handgestures-thumbupleft: