Shotie condensor

[googe]

Hey all, need some feed back on designs. I want to do a 3" shotie, the pipe i can get is about 300mm long, is this to short?. I was going to put 5-6, 3/4" pipe inside, but i have a bit of 12mm OD pipe here with 8mm ID, its thicker walled than standard stuff, i was thinking of jaming as much of this stuff in as possible, might be able to get around 10-12 inside the 3". Only reason im thinking the smaller stuff is because there will be more vapor in contact with more cooling area commpaired to bigger pipe, i think :think: . Which would be a better option in your opinion?. Also, has anyone got some pic's or diagrams or a link of a shotie build, just need some pointers on the end plates and how they connect and what position. Thanks.

Cheers

[Kimbo]

Hi mate, I would go the 12mm pipes in that and cram as many as you can mate :handgestures-thumbupleft:

[googe]

Thanks kimbo, i think your right :handgestures-thumbupleft: