Linny wrote:yep your right ,,, will need a picaxe and write your own code LOL good luck
you will probably need a k-type thermocouple on each outlet of the RC and PC . which will give a variable voltage to the PIC ... with programming you can take that input and use a 12VDC source to output a slanted DC to a solenoid. and also power to a 12VDC pump.
I may have or have not thought about this before :-B
It has been talked about here a lot with feeding the pc into the.rc for better control, I thought this might be the next step
MacStill wrote:do you think you might have a "little" flooding issue there ?
Return to Hardware Research & Development
Users browsing this forum: No registered users and 86 guests