and would it work? (for a proposed C.M. build)
Zak Griffin wrote:Nowhere near as much surface area there as there is in a coil... You also want cold water in at the top and out at the bottom ;-)
Zak Griffin wrote:Nowhere near as much surface area there as there is in a coil... You also want cold water in at the top and out at the bottom ;-)
Nowhere near as much surface area there as there is in a coil
hillzabilly wrote:In my opinion condencer design is about efficency ,yeh it will work but to do the same job as a coil or shotgun it may have to be three times the length and your coolant flow increased ,and for most of us getting more packing height is more important .cheers hillzabilly
Andy wrote:you could increase the flow rate of the water in 1/2'. but what you are doing is decreasing the surface area and efficiency of the condenser and to compensate you are increasing the water flow.
Return to Hardware Research & Development
Users browsing this forum: No registered users and 11 guests