Where to buy 1/4" valve

This area is to be used for submitting plans, referencing and conversations related to building stills and accessories.

Re: Where to buy 1/4" valve

Postby limitedsky » Wed May 06, 2015 10:47 am

Hardie355 wrote:If you go 3/8 it'll run better if you want to run it in pot mode. (Detuned)
I have a heap of 3/8 copper and a few needle valves laying around. If you want them?


I'm going to build a pot next I reckon, so doubt I'll ever put it into pot mode or do stripping runs with it.
But still would love to grab that needle valve from you Hardie. Check your PM. Happy to pay today.
limitedsky
 
Posts: 88
Images: 0
Joined: Sun Apr 26, 2015 8:22 am
equipment: 2" Boka
2" Pot

Re: Where to buy 1/4" valve

Postby Ploopyster » Mon Jun 08, 2015 5:23 pm

MacStill wrote:I've never said to use 3/4" for a 2" boka outlet, I always recommend 3/8" ;-)

Don't worry. Found it Mac
Ploopyster
 
Posts: 18
Joined: Wed Jan 28, 2015 5:10 pm
equipment: Home-made jobby. 2" 1metre column with interchangeable pot still head (with 500mm 2" shotgun condenser) and building a boka head with Liebig condenser.

Re: Where to buy 1/4" valve

Postby MacStill » Mon Jun 08, 2015 8:10 pm

:D
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Previous

Return to Hardware Research & Development



Who is online

Users browsing this forum: No registered users and 16 guests

x