Newbie First post

Say Hi and introduce yourself

Newbie First post

Postby grasmere » Sun Jun 09, 2019 11:37 am

Hello everybody
I use a 25 LTR Beerme Spirit Maker and would appreciate any advice on using a 2Mtr x75cm Rainwater Tank, gravity feeding through Bathroom through
the Spirit Maker into a bath and then returning by immersion pump to the top of the tank. Would it work
grasmere
 
Posts: 73
Joined: Mon Jun 03, 2019 3:08 pm
equipment: BeerMe Spirit Maker and 35Ltr Brewzilla

Re: Newbie First post

Postby Sam. » Sun Jun 09, 2019 11:41 am

Welcome mate, what is the capacity of the tank?

You would be better off putting the immersion pump in the tank and using garden hose for the flow and return line.
Sam.
Site Admin
 
Posts: 9731
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
2 x 18 Gal boilers
Italian Spiral burner with HP reg.

Re: Newbie First post

Postby grasmere » Sun Jun 09, 2019 2:56 pm

Thanks you for the reply Sam. The reason for my using a tank is in saving water from my bath. If I pump from the tank I would lose all of my water down the bath drain. That is why I was looking for a recycle system
grasmere
 
Posts: 73
Joined: Mon Jun 03, 2019 3:08 pm
equipment: BeerMe Spirit Maker and 35Ltr Brewzilla

Re: Newbie First post

Postby grasmere » Sun Jun 09, 2019 2:59 pm

I see what you are suggesting Sam. Use the pump to the distiller and return hose.With the height of 2 meters I wonder if it would still return
grasmere
 
Posts: 73
Joined: Mon Jun 03, 2019 3:08 pm
equipment: BeerMe Spirit Maker and 35Ltr Brewzilla

Re: Newbie First post

Postby grasmere » Sun Jun 09, 2019 3:04 pm

Thank you for that Sam That is certainly a better idea
grasmere
 
Posts: 73
Joined: Mon Jun 03, 2019 3:08 pm
equipment: BeerMe Spirit Maker and 35Ltr Brewzilla

Re: Newbie First post

Postby Sam. » Sun Jun 09, 2019 9:58 pm

Yeah mate a 750w submersible pump will do what you want :handgestures-thumbupleft:
Sam.
Site Admin
 
Posts: 9731
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
2 x 18 Gal boilers
Italian Spiral burner with HP reg.


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 6 guests

x