G'day from FNQ

Say Hi and introduce yourself

G'day from FNQ

Postby 43WR776 » Tue Sep 26, 2017 11:01 am

G'day guys how is everyone going on this set of school holidays. Well this set of school holidays i took the plunge and bought a keggomax still from fleabay, half the price one would pay in a shop so cant complain and will mainly be doing rum for myself and bourbon for the missus. Scored a keg from my Aunty to use as a boiler and whacked a couple of weldless elements into it. I have been brewing with a mate for approx 6 months (t500) and wanted to stray away from the turbo' s that my mate uses. I have a tpw going atm for my sacrificial run then to start working my way through the tried and true section.

Cheers 776
43WR776
 
Posts: 5
Joined: Tue Sep 26, 2017 10:43 am
Location: FNQ
equipment: 50l keg with 2 weldless heating elements
Keggomax CM still

Re: G'day from FNQ

Postby bluc » Tue Sep 26, 2017 11:22 am

Can you use a cm for flavoured spirits?
bluc
Site Donor
 
Posts: 8968
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: G'day from FNQ

Postby 43WR776 » Tue Sep 26, 2017 11:34 am

This will mainly be used in pot mode, has been discussed in other threads, will only try use the cm for feints or the odd tpw wash after a stripping run.
43WR776
 
Posts: 5
Joined: Tue Sep 26, 2017 10:43 am
Location: FNQ
equipment: 50l keg with 2 weldless heating elements
Keggomax CM still

Re: G'day from FNQ

Postby woodduck » Tue Sep 26, 2017 11:53 am

G'day mate, welcome aboard :greetings-waveyellow:

Sounds like you off to a good start. Enjoy the forum :handgestures-thumbupleft:
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: G'day from FNQ

Postby CyBaThUg » Tue Sep 26, 2017 7:21 pm

How's it going good to c a few more from nqld here go cowboys
CyBaThUg
 
Posts: 493
Joined: Thu Sep 27, 2012 7:54 pm
Location: townsville
equipment: pot still

Re: G'day from FNQ

Postby wiifm » Wed Sep 27, 2017 9:27 pm

Welcome from Cairns :handgestures-thumbupleft:
wiifm
 
Posts: 192
Joined: Sun Nov 24, 2013 7:03 am
Location: Cairns
equipment: 4 plate glasser using FSD bubble caps

Re: G'day from FNQ

Postby 43WR776 » Thu Sep 28, 2017 9:47 pm

Cheers all for the warm welcome. Wiifm I am located in Gordonvale, just a stone's throw away, lol
43WR776
 
Posts: 5
Joined: Tue Sep 26, 2017 10:43 am
Location: FNQ
equipment: 50l keg with 2 weldless heating elements
Keggomax CM still

Re: G'day from FNQ

Postby wiifm » Sat Sep 30, 2017 6:16 pm

Pretty close mate. I am in one of the M's :handgestures-thumbupleft:
wiifm
 
Posts: 192
Joined: Sun Nov 24, 2013 7:03 am
Location: Cairns
equipment: 4 plate glasser using FSD bubble caps


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 24 guests

x