Just want to say hi to all new to the site

Say Hi and introduce yourself

Just want to say hi to all new to the site

Postby Tow&shine » Wed Jan 24, 2018 7:40 pm

Would like to say hello to all I’m Very new to all this I just got my self a pure distilling set up and looking to To learn so if there’s any tips you can give me about the set up I have it be much appreciated thanks guys
Last edited by Tow&shine on Wed Jan 24, 2018 7:42 pm, edited 1 time in total.
Tow&shine
 
Posts: 2
Joined: Mon Jan 22, 2018 2:40 pm
Location: South east vic
equipment: pure distilling Reflux stock

Re: Just want to say hi to all new to the site

Postby hillzabilly » Wed Jan 24, 2018 7:50 pm

G-day and welcome mate,try the newbies section or library for reading ,but experience and doing it is were we all learn .cheers hillzabilly :handgestures-thumbupleft:
hillzabilly
 
Posts: 1509
Images: 0
Joined: Sun Jun 10, 2012 3:18 pm
Location: PERTH WEST AUSSIE
equipment: 10 gallon OZARK pot still ,2inch and 3inch Nixon Stone coloum stills ,10 and 18 gal beer keg boilers,5gal thumper keg.And the one and only 4" Five Star Southern Cross .

Re: Just want to say hi to all new to the site

Postby woodduck » Wed Jan 24, 2018 8:14 pm

Hi mate, welcome :greetings-waveyellow:

There's some useful links in my signature below that will help you get under way :handgestures-thumbupleft:
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Just want to say hi to all new to the site

Postby Sam. » Wed Jan 24, 2018 8:24 pm

Welcome here mate :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Just want to say hi to all new to the site

Postby Professor Green » Wed Jan 24, 2018 8:25 pm

Welcome Tow&shine.

I don't know much about the pure distilling rigs so can't offer any advice on those but if I were you, I'd get a TPW on right away then start studying the newbies section and by the time your done reading, it will be ready to run.

Cheers,
Prof. Green.
Professor Green
 
Posts: 2484
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Just want to say hi to all new to the site

Postby Tow&shine » Wed Jan 24, 2018 10:40 pm

Professor Green wrote:Welcome Tow&shine.

I don't know much about the pure distilling rigs so can't offer any advice on those but if I were you, I'd get a TPW on right away then start studying the newbies section and by the time your done reading, it will be ready to run.

Cheers,
Prof. Green.

Sorry when I say I am new I have done about a dozen runs and just did my first run on a tpw wash tonight and just about to start a ffv have done a lot of reading on here but there is so much info getting a little lost
Tow&shine
 
Posts: 2
Joined: Mon Jan 22, 2018 2:40 pm
Location: South east vic
equipment: pure distilling Reflux stock

Re: Just want to say hi to all new to the site

Postby Professor Green » Thu Jan 25, 2018 5:38 am

Ah, righto.

There is a lot to learn but you'll get there. Patience is the key to this pastime. :handgestures-thumbupleft:

Cheers,
Prof. Green.
Professor Green
 
Posts: 2484
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Just want to say hi to all new to the site

Postby Andyj986 » Mon Jan 29, 2018 8:27 pm

Tow&shine wrote:Would like to say hello to all I’m Very new to all this I just got my self a pure distilling set up and looking to To learn so if there’s any tips you can give me about the set up I have it be much appreciated thanks guys


I have a Pure Distilling rig, feel free ask me questions about it, im sure ill be able to help ya in one way or another :handgestures-thumbupleft:
Andyj986
 
Posts: 14
Joined: Tue Jan 16, 2018 2:02 pm
Location: VIC, Australia.
equipment: Copper LM Reflux


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 12 guests

x