Page 1 of 1
Am I on the right track
Posted:
Thu Mar 01, 2018 4:02 pmby Doug Blair
I have a alcoengine pot still from Kegland & I an interested in making gin. I am thinking of cutting my still just below the angle return & welding in a tri-clover fitting on so I can hang a gin basket off the thermometer sleeve. Or should I cut it into the downward section ? The pic may give a better idea....
Cheers
Blairy
Re: Am I on the right track
Posted:
Thu Mar 01, 2018 4:45 pmby Sam.
G'day mate, moved your post here as it's you first post so welcome :handgestures-thumbupleft:
Can't just hang your botanicals in the vapour path in your boiler rather than cutting your still up?
Or macerating the botanicals then rerunning it through the pot still?
Re: Am I on the right track
Posted:
Thu Mar 01, 2018 5:22 pmby bluc
:text-+1: i wouldnt try and modify it..
Re: Am I on the right track
Posted:
Thu Mar 01, 2018 5:43 pmby Professor Green
Welcome to AD mate.
Sam. wrote:Or macerating the botanicals then rerunning it through the pot still?
:text-+1:
This is the way I would go rather than carving up your pot still. Google "Odin's Easy Gin" for a good starting point (there's two versions of this, you one the one from HD forum).
Cheers,
Prof. Green.