Hi All

Say Hi and introduce yourself

Hi All

Postby Goog » Thu Apr 05, 2018 9:33 pm

Hi All, just wanted to say hi and thank you all for such a great site. Have just been given a air still so have been poking around for a few days reading and learning. Have found it interesting and am starting to get keen to give it a go. Will start off small and see what happens from there. Cheers Goog.
Goog
 
Posts: 3
Joined: Thu Apr 05, 2018 9:01 pm
Location: South Australia
equipment: Air still
2” pot on a keg boiler

Re: Hi All

Postby woodduck » Thu Apr 05, 2018 9:43 pm

Welcome mate :greetings-waveyellow:

It all seems a bit daunting to start with but it will all make sence in time. Start simple by reading the newbies corner and extend your knowledge as you get more runs under your belt :handgestures-thumbupleft:

Enjoy the new hobby
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Hi All

Postby Professor Green » Thu Apr 05, 2018 10:59 pm

Welcome Goog.

Have a read of this thread on getting the best from your airstilll, pick a simple wash start with (WBAB is a good easy one and makes a nice whisky) and you'll well on your way to making some decent hooch.

Cheers,
Prof. Green.
Professor Green
 
Posts: 2483
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Hi All

Postby Sam. » Fri Apr 06, 2018 6:08 pm

Welcome here mate :handgestures-thumbupleft:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Hi All

Postby Goog » Fri Apr 06, 2018 8:38 pm

Thanks for the welcome Guys, still got a lot of reading to do but looking forward to seeing what happens.
Goog
 
Posts: 3
Joined: Thu Apr 05, 2018 9:01 pm
Location: South Australia
equipment: Air still
2” pot on a keg boiler


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 11 guests

x