Yeah it was 0.920, got down pretty low.
No I didn’t adjust coolant flow. Might try that next time. Mind you, I did monitor that and the water was coming out cold all times throughout the run when I checked it. The condenser I bought is actually advertised as a FM (flow management) still, so supposedly the coolant flow isn’t supposed to affect the rate of drips coming out. It’s just whether you put in the 0.6mm flow restrictor or the 1.0mm one. According to the how-to video, you just get decent water flow happening and the ethanol condensed on the lower coils usually before even getting to the top ones. The water was always coming out cold so I assume it was working. But next run I’ll try more power from the start and see what sort of equilibrium is achieved.
It’s about 6-7min through this video where he explains how the cooling and coils work : https://youtu.be/pxY8cOYy4Fo
Mate, thanks heaps for getting involved in this, I appreciate your help! Always keen to learn and get my process better