Hi

Say Hi and introduce yourself

Hi

Postby Brewr » Fri Oct 12, 2018 8:49 pm

Hi everyone just finished my pot still build with a copper collum and cross over to a stainless fsd 2inch pc and parrot from Andrew at Five star great bloke to deal with.

Just need a keg to attach to now
30ED5F0B-D1DC-4372-B2D2-4C83111C26E2.jpeg
You do not have the required permissions to view the files attached to this post.
Brewr
 
Posts: 10
Joined: Fri Sep 21, 2018 4:56 am
Location: Brisbane northside
equipment: 2inch Copper pot still with fsd 2inch pc with 50 a litre keg boiler planned when one pops up.
3v herms
Grainfather
5 Tap kegerator
Temp controlled ferment fridge
2 roller mill
Stir plate

Re: Hi

Postby bluc » Fri Oct 12, 2018 8:51 pm

Sweet :handgestures-thumbupleft: you wil need a ferrule on the riser to attach to keg..
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Hi

Postby Brewr » Fri Oct 12, 2018 8:59 pm

I actually took that pic about 10 minutes before deciding to rip into the last solder which was the last ferrul and copper adapter after some initial difficulties trying to produce a shotgun condenser, with my novice soldering skills letting me down I called FSD for a stainless fuss free PC :dance:
Last edited by Brewr on Fri Oct 12, 2018 9:00 pm, edited 1 time in total.
Brewr
 
Posts: 10
Joined: Fri Sep 21, 2018 4:56 am
Location: Brisbane northside
equipment: 2inch Copper pot still with fsd 2inch pc with 50 a litre keg boiler planned when one pops up.
3v herms
Grainfather
5 Tap kegerator
Temp controlled ferment fridge
2 roller mill
Stir plate

Re: Hi

Postby bluc » Fri Oct 12, 2018 9:16 pm

I came close to buying but none in stock so gritted my teeth and got it done :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Hi

Postby Brewr » Fri Oct 12, 2018 9:20 pm

I had a crack, got one end right and over heated the other end and burnt some holes.
You do not have the required permissions to view the files attached to this post.
Brewr
 
Posts: 10
Joined: Fri Sep 21, 2018 4:56 am
Location: Brisbane northside
equipment: 2inch Copper pot still with fsd 2inch pc with 50 a litre keg boiler planned when one pops up.
3v herms
Grainfather
5 Tap kegerator
Temp controlled ferment fridge
2 roller mill
Stir plate

Re: Hi

Postby Andrew » Sat Oct 13, 2018 5:40 am

Thanks for calling in Brewr, was great to catch up.
I told you it’s not hard posting pics :teasing-neener:
Good luck with the keg, I’ll keep my eyes open :handgestures-thumbupleft:
Andrew
 
Posts: 393
Images: 0
Joined: Sat Jun 11, 2011 12:58 pm
Location: S.E.Brisbane
equipment: Anything I choose From The 5 Star Range

Re: Hi

Postby Brewr » Sat Oct 13, 2018 8:10 am

Don’t be surprised if I’m back for upgrades :handgestures-thumbupleft:
Brewr
 
Posts: 10
Joined: Fri Sep 21, 2018 4:56 am
Location: Brisbane northside
equipment: 2inch Copper pot still with fsd 2inch pc with 50 a litre keg boiler planned when one pops up.
3v herms
Grainfather
5 Tap kegerator
Temp controlled ferment fridge
2 roller mill
Stir plate

Re: Hi

Postby Andrew » Sat Oct 13, 2018 9:12 am

Brewr wrote:Don’t be surprised if I’m back for upgrades :handgestures-thumbupleft:

Any time mate :handgestures-thumbupleft: :laughing-rolling:
Andrew
 
Posts: 393
Images: 0
Joined: Sat Jun 11, 2011 12:58 pm
Location: S.E.Brisbane
equipment: Anything I choose From The 5 Star Range


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 12 guests

x