Page 1 of 1

Newbie

PostPosted: Mon Dec 31, 2018 1:37 pm
by Shayned
Hi, I’ve been lurking about for a while trying to gain an understanding around distilling. I’ve been doing the Country Wine Making thing for a few years and learnt a fair bit about that while making more than my fair share of stuff ups along the way. Think I might be getting close to trying a new challenge.
I’ve had a long chat with my liver and while it isn’t thrilled, it sort of understands that I need to have a go at distilling.

Re: Newbie

PostPosted: Mon Dec 31, 2018 1:59 pm
by Professor Green
Welcome to AD Shayned.

There's a wealth of information in newbies corner to help you on your way.

What kind of spirits are you looking to make?

Cheers,
Prof. Green.

Re: Newbie

PostPosted: Mon Dec 31, 2018 3:14 pm
by Shayned
Thanks Prof Green, I think I have read most of newbie corner over the last 8 months some of it twice and some will get another look before I’m done. For me personally the Scotch, Bourbon and Rum trifecta holds the most interest but I also would go a long way towards keeping the hugs and kisses happy if I could produce a good Sambucca and the odd bit of decent vodka. Before long I will need advice around stills, or confirmation of what understandings I have gleaned from here so far.
With the wine making I keep interested by chasing new flavours so I imagine I will want to do the same with distilling.

Re: Newbie

PostPosted: Mon Dec 31, 2018 3:18 pm
by j0sh2008
Welcome :greetings-waveyellow:

Sounds like your into the right track :handgestures-thumbupleft:

Are you going to build your own or buy something ready to go?

Re: Newbie

PostPosted: Mon Dec 31, 2018 3:27 pm
by Doubleuj
Gday Shayned, glad to see your liver is on board :handgestures-thumbupleft:

Re: Newbie

PostPosted: Mon Dec 31, 2018 3:39 pm
by Shayned
j0sh2008 wrote:Welcome :greetings-waveyellow:

Sounds like your into the right track :handgestures-thumbupleft:

Are you going to build your own or buy something ready to go?

Thanks mate, I’m afraid I will have to pay a premium and buy one, I just don’t have the metal working skill set needed. At this point though, I don’t think I particularly want to go the Turbo 500, sugar wash and commercial flavouring route either. I think there is something fundamentally wrong with me, in that, I always seem to take the harder option when it’s presented.

Re: Newbie

PostPosted: Mon Dec 31, 2018 3:43 pm
by Shayned
Doubleuj wrote:Gday Shayned, glad to see your liver is on board :handgestures-thumbupleft:

Cheers, In the end I had to threaten it with a bottle of Mattingly and Moore Bourbon, that shut it up!!

Re: Newbie

PostPosted: Mon Dec 31, 2018 4:08 pm
by j0sh2008
Yeah I did the same, I started and gave up.

You should have a chat with andrew, I'm really happy with my setup. Top quality gear :handgestures-thumbupleft:

Re: Newbie

PostPosted: Mon Dec 31, 2018 4:20 pm
by Shayned
j0sh2008 wrote:Yeah I did the same, I started and gave up.

You should have a chat with andrew, I'm really happy with my setup. Top quality gear :handgestures-thumbupleft:

Thanks for the advice.