Hi All from the middle of no where!

Say Hi and introduce yourself

Hi All from the middle of no where!

Postby Tnuc05 » Tue Apr 09, 2019 10:08 pm

Just wanted to say hi and Thanks for all the great info on the site.

Just running my first Batch of Macwhisky right now and besides a couple of small water leaks all is going well!
Big thanks to Andrew @ 5Star for the great gear and advice - bit of an upgrade from the old T500 haha :music-deathmetal:

Cheers
Tnuc05
 
Posts: 5
Joined: Fri Oct 19, 2018 10:00 am
Location: Middle of NoWhere Pilbara WA
equipment: 5star 6 inch bubbler and a full 9600w of 5star power boiler

Re: Hi All from the middle of no where!

Postby Doubleuj » Tue Apr 09, 2019 10:15 pm

Gday mate, I’m sipping on some Mac whiskey as we speak, it’s a great drop.
Welcome to the forum :handgestures-thumbupleft:
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser

Re: Hi All from the middle of no where!

Postby Andrew » Tue Apr 09, 2019 10:32 pm

Glad we finally got there brother
Pics or it didn’t happen as they say :dance:
Andrew
 
Posts: 393
Images: 0
Joined: Sat Jun 11, 2011 12:58 pm
Location: S.E.Brisbane
equipment: Anything I choose From The 5 Star Range

Re: Hi All from the middle of no where!

Postby Tnuc05 » Tue Apr 09, 2019 10:55 pm

just an achievement to post for a start! think i must have a leak somewhere need a mirror..... 3600 plus the 2400 and its not cranking so going slow! lucky i have the key element to staying up late brewing away.... haha
Tnuc05
 
Posts: 5
Joined: Fri Oct 19, 2018 10:00 am
Location: Middle of NoWhere Pilbara WA
equipment: 5star 6 inch bubbler and a full 9600w of 5star power boiler

Re: Hi All from the middle of no where!

Postby fizzix » Wed Apr 10, 2019 12:02 am

Welcome, Tnuc05!
fizzix
 
Posts: 42
Joined: Sun Sep 09, 2018 11:26 am
Location: St. Peters, Missouri
equipment: 8-gallon stainless 2" reflux column with copper mesh packing.

Re: Hi All from the middle of no where!

Postby woodduck » Wed Apr 10, 2019 7:18 am

Hi mate, welcome.

How'd the run go?
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Hi All from the middle of no where!

Postby bluc » Wed Apr 10, 2019 10:07 am

Sounds awesome and welcome :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8968
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Hi All from the middle of no where!

Postby Tnuc05 » Wed Apr 10, 2019 4:17 pm

Thanks Guys

The run was a Bit Cold i rekon after talking To Andrew from 5SD, 6000w i thought was enough but i have another 3600w element to go again.

Thanks for the youtube Video Woodduck it was a big help, the forums are great but the video makes it all make sense!

also need to figure out how to cool her down properly its a bit hard when its still nearly 40 deg here !!

cheers
Tnuc05
 
Posts: 5
Joined: Fri Oct 19, 2018 10:00 am
Location: Middle of NoWhere Pilbara WA
equipment: 5star 6 inch bubbler and a full 9600w of 5star power boiler

Re: Hi All from the middle of no where!

Postby Lowie » Wed Apr 10, 2019 7:26 pm

:greetings-waveyellow:
Lowie
 
Posts: 712
Joined: Sun May 24, 2015 1:32 pm
Location: Crow eater
equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 28 guests

cron

x