5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchHello all,
I’m Steve from Perth, I’ve been home brewing for around 4-5 years, I’m thinking of getting into the distilling, so I’m here to learn.
Greetings from Perth
5 posts
• Page 1 of 1
Greetings from Perth
by Finley44 » Sat Mar 28, 2020 3:32 pm
- Finley44
- Posts: 10
- Joined: Fri Mar 27, 2020 9:45 am
- equipment: Not currently using any, thinking of convertinga BIAB set up into a dedicated still
Re: Greetings from Perth
by Professor Green » Sat Mar 28, 2020 4:12 pm
Welcome Steve from Perth.
There's plenty of good folks here from which to learn.
What kind of spirits are you looking to make?
Cheers,
Prof. Green.
There's plenty of good folks here from which to learn.
What kind of spirits are you looking to make?
Cheers,
Prof. Green.
- Professor Green
- Posts: 2485
- Joined: Fri Apr 17, 2015 1:10 pm
- Location: Victoria
- equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element
Re: Greetings from Perth
by db1979 » Sun Mar 29, 2020 6:58 am
Welcome to AD. There's plenty to read to help you work out what you want to do. It's a good thing you came here before buying something you might regret from a home brew shop.
- db1979
- Posts: 1760
- Joined: Sat Dec 29, 2012 3:47 pm
- Location: South of the big smoke in banana bender land.
- equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.
Re: Greetings from Perth
by woodduck » Sun Mar 29, 2020 1:34 pm
welcome aboard :greetings-waveyellow:
Spend a few days reading every thread in the newbies corner, it will help you understand what your getting into. Don't rush in to buying a still until you've done some research on here to find what still will suit your needs.
Good luck :handgestures-thumbupleft:
Spend a few days reading every thread in the newbies corner, it will help you understand what your getting into. Don't rush in to buying a still until you've done some research on here to find what still will suit your needs.
Good luck :handgestures-thumbupleft:
- woodduck
- Lifetime Member
- Posts: 3497
- Joined: Mon Jun 16, 2014 5:54 pm
- Location: Good old country SA
- equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.
- CH3CH2OH
- Posts: 369
- Joined: Tue Oct 23, 2012 9:14 am
- equipment: 4" copper 7 plate bubbler with packed section on a 50l boiler
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 13 guests