Page 1 of 1
Greeting from Cairns FNQ
Posted:
Tue Oct 20, 2020 7:38 amby SteveW
Been an all-grain beer brewer for some 30years, and distiller for 20years.
I have a four x50litre barrel beer brewery, and the HLT converted for a still with a 3600w element, PID and 50mm column.
Just started doing corn/malt mashes
Re: Greeting from Cairns FNQ
Posted:
Tue Oct 20, 2020 9:31 amby bluc
Welcome mate look forward to hearing some results :handgestures-thumbupleft:
Re: Greeting from Cairns FNQ
Posted:
Tue Oct 20, 2020 10:38 amby Wellsy
Great to hear from you, you have years of experience we can all draw on :)
I foolishly said I brewed my own beer for 15 years to someone on here the other day. They then proceeded to tell me what they did to get a red beer. My head exploded so now if asked I say I tipped cans of coopers ale into some sugar and yeast waited 5 days and then put it in a long neck with some sugar to gas it. Who would have thought there were home brewers and home brewers lol.
You will get heaps of high level advice on here mate just not from me
Re: Greeting from Cairns FNQ
Posted:
Tue Oct 20, 2020 11:58 amby bluc
Btw your better off not using a pid wich constantly chases temp for control and instead use a similar setup but with a ssr and a potentiometer which will give a const wattage and not smear the product..
Re: Greeting from Cairns FNQ
Posted:
Tue Oct 20, 2020 12:25 pmby druwade
G'day mate - definitely excited to see some amazing posts.
Re: Greeting from Cairns FNQ
Posted:
Tue Oct 20, 2020 12:30 pmby M8Harry
Welcome to the forum :greetings-waveyellow:
Re: Greeting from Cairns FNQ
Posted:
Wed Oct 21, 2020 6:57 amby woodduck
Welcome aboard mate :greetings-waveyellow:
What sort of still you running? We love photos around here
What do like to drink/make?
Enjoy the forum
Re: Greeting from Cairns FNQ
Posted:
Wed Oct 21, 2020 9:32 pmby dans.brew
Welcome! :greetings-waveyellow:
Re: Greeting from Cairns FNQ
Posted:
Thu Oct 29, 2020 5:02 pmby SteveW
Bluc
I was using gas for many years, and only went electric six months ago.
My PID is 15amp with SSR and 3500 watt element.
Are you saying a PWM will give more control, been searching this site, but too much technical stuff for my old brain to absorb?
Can you recommend some good Youtube stuff, and what is your heat controlling setup if you don't mind sharing?
Re: Greeting from Cairns FNQ
Posted:
Fri Oct 30, 2020 7:20 amby bluc
Yea biggest prob with pid is it works off temp so it constsntly increases decreases voltage to hold temp. That will mix the fractions to a degree and it will smear. You will get more heads/tails in the hearts then you should.
With a ssr and potentionmeter although its variable and it switch on off real fast its constant voltage not constantly changing so you will get a cleaner hearts cut. Hope that makes sense.