G'day from Shuffles

Say Hi and introduce yourself

G'day from Shuffles

Postby shuffles » Sat Nov 03, 2012 10:57 am

Hello forum...

I am a uni student living in Melbourne but my home is in ravenswood north Queensland
But this summer I would like to produce a drink of my own as a little project

I'm thinking of rum...I love it.

Other than that I love cigars and a bit of storm photography and I'm keen to join the community
shuffles
 
Posts: 3
Joined: Sat Nov 03, 2012 12:23 am
equipment: none so far

Re: G'day from Shuffles

Postby crow » Sat Nov 03, 2012 11:03 am

Hi shuffles welcome to the forum bud , yep there's load of imfo here concerning rum production and the sorts of stills required to produce in
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: G'day from Shuffles

Postby JayD » Sat Nov 03, 2012 11:10 am

Welcome to the forum Shuffle's
JayD
 
Posts: 1669
Joined: Mon Jul 09, 2012 7:46 pm
Location: Tasmania
equipment: JayD's Copper Worx

Re: G'day from Shuffles

Postby Linno » Sat Nov 03, 2012 11:27 am

Hi Shuffles

welcome along mate. :handgestures-thumbupleft: Theres a couple of good easy rum recipes on here that you will enjoy.
Linno
 
Posts: 314
Joined: Sun May 13, 2012 3:20 pm
Location: Perth SoR
equipment: FSD Mac 4 version 1 #001
4" single cap, 4 plate SS Bubbler,
400mm SS packed extension

Re: G'day from Shuffles

Postby Sam. » Sat Nov 03, 2012 11:36 am

Hi mate, rum is a very popular drink around here :laughing-rolling:

You shouldn't be short of supplies being in the land of the QLD :handgestures-thumbupleft:

Check out the recipes in the tried and proven section.
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: G'day from Shuffles

Postby bigwheel » Sat Nov 03, 2012 1:08 pm

G'Day Mate(es). Welcome aboard.
bigwheel
 
Posts: 34
Joined: Wed Jul 25, 2012 3:38 am
Location: N. Texas
equipment: 3" Brewhaus SS combo reflux/pot still..15 gallon milk bucket boiler. Copper mesh packing.

Re: G'day from Shuffles

Postby Kimbo » Sat Nov 03, 2012 3:14 pm

Hi Shuffles, welcome to the nuthouse mate.
What are you studying?
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: G'day from Shuffles

Postby shuffles » Sat Nov 03, 2012 5:51 pm

Hey Thank you all

I study Aviation at the moment but next year that could change to Aerospace engineering
got 1 more exam left this year this week then I can go home :D

what basic equipment should I look at getting?
shuffles
 
Posts: 3
Joined: Sat Nov 03, 2012 12:23 am
equipment: none so far

Re: G'day from Shuffles

Postby Linny » Sat Nov 03, 2012 6:56 pm

what airframe you working on , im a avionics technician thats now studying Elec Eng... can always give you tips , where you studying at ?
Linny
 
Posts: 1147
Joined: Thu Oct 11, 2012 8:46 pm
Location: Newcastle NSW
equipment: 4 Plate 3" Glass Bubbler - 50L Boiler
50L BIAB Temp Controlled Mash Tun

3" Carter Head Soon to Come

Re: G'day from Shuffles

Postby shuffles » Sat Nov 03, 2012 9:56 pm

Hey at RMIT, just aviation as the industry at the moment and then general fluid if I get into Aerospace. Dynamics and fluids, more common engineering stuff and become a little more specific in the later years.

This holidays along side the Cane cutters cordial, I hope to make an MAV or at least the wing section.
shuffles
 
Posts: 3
Joined: Sat Nov 03, 2012 12:23 am
equipment: none so far


Return to Welcome Centre



Who is online

Users browsing this forum: Thrudd and 89 guests

x