Another SA Newbie

Say Hi and introduce yourself

Another SA Newbie

Postby brianp » Sat Nov 10, 2012 7:52 pm

Hi. I'm Brian from South Australia.
I have a Pure Distilling reflux still.
Glad I have joined this forum as I have found a lot of info. here that im slowly starting to understand.
My Dad told me to always drink in moderation. So that's when I started drinking. :))
Thanks Brian.
brianp
 
Posts: 23
Joined: Thu Oct 25, 2012 8:46 pm
Location: South Australia
equipment: Pure Distilling Reflux Still & Made it me self Pot Still

Re: Another SA Newbie

Postby MacStill » Sat Nov 10, 2012 7:54 pm

OK that's it, no more SA guys allowed..... Bogans rule here ok :laughing-rolling: :laughing-rolling: :laughing-rolling:

Welcome bud :handgestures-thumbupleft:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Another SA Newbie

Postby Sam. » Sat Nov 10, 2012 8:10 pm

Welcome mate. Hey Mac THE SOUTH WILL RISE AGAIN!
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Another SA Newbie

Postby blond.chap » Sat Nov 10, 2012 8:36 pm

All stand behind general sam
blond.chap
 
Posts: 877
Images: 0
Joined: Tue Aug 07, 2012 12:11 pm
Location: South Australia
equipment: Paris Stillton (4" perforated bubbler)

Re: Another SA Newbie

Postby crow » Sat Nov 10, 2012 8:47 pm

Welcome Brian , So where does that put me Sam, deep behind enemy :laughing-rolling: :laughing-rolling: :laughing-rolling: lines
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Another SA Newbie

Postby Sam. » Sun Nov 11, 2012 12:03 am

You are first on the sniper lost crow. We don't take kindly to defectors.....
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Another SA Newbie

Postby Linno » Sun Nov 11, 2012 12:18 am

wow looks like the gubment just put the broadband cable thru SA by all the new members.

welcome brian :handgestures-thumbupleft: i have the same still ......there a good reliable kit mate. enjoy and theres plent advise on them here.
Linno
 
Posts: 314
Joined: Sun May 13, 2012 3:20 pm
Location: Perth SoR
equipment: FSD Mac 4 version 1 #001
4" single cap, 4 plate SS Bubbler,
400mm SS packed extension

Re: Another SA Newbie

Postby crow » Sun Nov 11, 2012 12:20 am

ouch defectors a bit rough , forced in to exile is a better description , can't say I've integrated, hell haven't even learnt the lingo. Been asked if I was born in England about have a dozen times :roll: just coz we can speak the langue doesn't mean we were born there :laughing-rolling:
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Another SA Newbie

Postby Urrazeb » Sun Nov 11, 2012 2:50 am

welcome mate! you should love it here :handgestures-thumbupleft:
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: Another SA Newbie

Postby bt1 » Sun Nov 11, 2012 5:47 am

Welcome bloke,

If your after SA mtls or supplies need a hand with sourcing let me know.

Sam, I always considered crow a deep planted spy...we pass encypted msgs inside the lids of Pale Ale bottles.

Enjoy the learning curve, get stuck, ask!

bt1
bt1
 
Posts: 2448
Joined: Sun Apr 22, 2012 11:56 am
Location: Adelaide
equipment: 2 x Glass Bubblers, 5 plate 89mm & 6 plate 110mm
4" 6 plate copper bubbler, 500mm copper packed section
Several pots, custom boiler
14 keg rotating brew setup, fermentation & dispenser fridges.

Re: Another SA Newbie

Postby brianp » Sun Nov 11, 2012 8:02 am

Thanks for the warm welcome everyone.
Does anyone on here come from up near the copper triangle in sa?
Cheers Brian. Image
brianp
 
Posts: 23
Joined: Thu Oct 25, 2012 8:46 pm
Location: South Australia
equipment: Pure Distilling Reflux Still & Made it me self Pot Still

Another SA Newbie

Postby BackyardBrewer » Sun Nov 11, 2012 8:16 am

Welcome, same state, same still.

You'll get more out of it with this forum that's for sure.
BackyardBrewer
Site Donor
 
Posts: 1824
Joined: Thu Mar 22, 2012 1:18 pm
Location: South Aussie
equipment: Solid Copper Love Machine (Plated column bubbler), hand made with love by a forum member
50L keg boiler with 2 x 2400w elements
PURE distilling Reflux still + a tonne of homebrew gear amassed over 10 years of brewing.

Re: Another SA Newbie

Postby hoppy » Sun Nov 11, 2012 5:14 pm

:text-+1: GO THE CROWEATERS :happy-partydance: were definitely on the rise enjoy the forum Brianp


Cheers Hoppy :mrgreen:
hoppy
 
Posts: 69
Joined: Wed Oct 19, 2011 3:46 pm
Location: UP THE DONGER A FEW HUNDRED KLICS WEST FROM THE BIG SMOKE
equipment: 50mm copper pure distilling reflux 50mm pot still

25 ltr electric boiler with voltage controller
location SA

Re: Another SA Newbie

Postby Goldie » Wed Nov 14, 2012 3:16 am

:text-welcomeconfetti: :text-welcomeconfetti: Howdy mate, plenty to read and learn here. Hours of fun.....
Goldie
 
Posts: 422
Joined: Fri Mar 23, 2012 12:22 am
Location: SOR Perth, WA
equipment: 4" four perf plate column on a 100lt SS boiler, 2" Pot Still on 50lt keg boiler


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 84 guests

x