Another Melbourne-ite

Say Hi and introduce yourself

Another Melbourne-ite

Postby tasteslikechicken » Sun Jan 13, 2013 9:28 am

Hi all, great site.
Been doing a fair bit of reading on here and other stiller forums over the past week or so and this joint seemed the go-to place to sign up.
Looks pretty laid back which suits me just fine.
Hope to learn a lot more from you guys sooner or later.

Cheers.
tasteslikechicken
 
Posts: 50
Joined: Thu Jan 10, 2013 8:29 pm
Location: melbourne-ish
equipment: nothing yet

Re: Another Melbourne-ite

Postby crow » Sun Jan 13, 2013 9:42 am

cheers TLC... :wtf: TLC :laughing-rolling: :laughing-rolling:
Welcome here bud some great fellas here to help you into this hobby :handgestures-thumbupleft:
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Another Melbourne-ite

Postby googe » Sun Jan 13, 2013 10:01 am

Haha I think you just get a nick name mate lol welcome :handgestures-thumbupleft: , crows right, some good blokes here, and Sheilas ;-). This is by far the best site the amount of help not will receive
. What do you like to drink? And have you got any preference to what still not want to make or buy?. Good luck mate, in in Melb too, west suburbs.

Cheers
googe
 

Another Melbourne-ite

Postby Urrazeb » Sun Jan 13, 2013 10:10 am

Welcome TLC. Good to hav u here. What do ya drink? You'll be pumping out some good gear in no time.

Enjoy!! :D
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: Another Melbourne-ite

Postby tasteslikechicken » Sun Jan 13, 2013 10:29 am

TLC - fark. I obviously thought that one through pretty thoroughly.

Cheers guys!

I'm generally a beer drinker but don't mind a bit of the hot stuff now and again, haven't acquired an actual taste for anything in particular, not too keen on gin or vodka but pretty much anything else goes.
Brother in law makes a pretty mean whiskey and saw his supply the other day :o and after a good hit out on that decided to give it a crack. The next day after thorough research (about 5 minutes) I ended up ordering some crazy contraption from across the ditch which should get here in a week or so. Looking forward to playing around with it. Looked ok for a novice like me - touch wood.

Googe, I'm in Avondale Heights mate. :handgestures-thumbupleft:
tasteslikechicken
 
Posts: 50
Joined: Thu Jan 10, 2013 8:29 pm
Location: melbourne-ish
equipment: nothing yet

Another Melbourne-ite

Postby Urrazeb » Sun Jan 13, 2013 12:08 pm

What type of still did u order? Got a link?

TLC ain't bad mate. Another member created the Northern Territory Piss Makers Society-NT PMS haha so I think ur ok
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: Another Melbourne-ite

Postby tasteslikechicken » Sun Jan 13, 2013 12:51 pm

Urrazeb wrote:What type of still did u order? Got a link?


http://www.youtube.com/watch?v=nYGOmOTVcOw
tasteslikechicken
 
Posts: 50
Joined: Thu Jan 10, 2013 8:29 pm
Location: melbourne-ish
equipment: nothing yet

Re: Another Melbourne-ite

Postby tasteslikechicken » Sun Jan 13, 2013 9:32 pm

Any good or have I been dicked? :handgestures-thumbupleft: :handgestures-thumbdown:
tasteslikechicken
 
Posts: 50
Joined: Thu Jan 10, 2013 8:29 pm
Location: melbourne-ish
equipment: nothing yet

Re: Another Melbourne-ite

Postby blond.chap » Sun Jan 13, 2013 9:38 pm

Looks alright to me, I'd collect into glass though, as a general rule high above spirits shouldn't touch plastic.
blond.chap
 
Posts: 877
Images: 0
Joined: Tue Aug 07, 2012 12:11 pm
Location: South Australia
equipment: Paris Stillton (4" perforated bubbler)

Re: Another Melbourne-ite

Postby tasteslikechicken » Sun Jan 13, 2013 10:09 pm

Thanks for the decent tip BC, I'll be all over a bit of glasswear. Thanks mate.
tasteslikechicken
 
Posts: 50
Joined: Thu Jan 10, 2013 8:29 pm
Location: melbourne-ish
equipment: nothing yet

Re: Another Melbourne-ite

Postby Cane Toad » Mon Jan 14, 2013 4:53 pm

Welcome to the forum TLC :handgestures-thumbupleft: we'll have you stilling like a pro in no time :handgestures-thumbupleft:
Cane Toad
 
Posts: 2473
Joined: Thu Jul 28, 2011 9:14 pm
Location: ask punkin
equipment: where's my football :(

Re: Another Melbourne-ite

Postby Kimbo » Mon Jan 14, 2013 4:55 pm

Welcome dude :handgestures-thumbupleft:
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: Another Melbourne-ite

Postby tasteslikechicken » Mon Jan 14, 2013 5:20 pm

Cupcake wrote:Welcome to the forum TLC :handgestures-thumbupleft: we'll have you stilling like a pro in no time :handgestures-thumbupleft:


Can believe that mate - this site/you guys is the duck's nuts.

cheers fellas. :handgestures-thumbupleft:
tasteslikechicken
 
Posts: 50
Joined: Thu Jan 10, 2013 8:29 pm
Location: melbourne-ish
equipment: nothing yet

Re: Another Melbourne-ite

Postby googe » Mon Jan 14, 2013 6:09 pm

Its great you feel that way already mate, it truely is a great site with so many wonderful people :handgestures-thumbupleft: . Im in Altona North, so not to far from you. Give me a yell if you need any help with places for cheapish copper and parts, there very few and far between in the west :sad: . Might be better up your way. Theres a scrap yard on ballarat rd that sells stuff, scappys i think its called.

Cheers
googe
 

Re: Another Melbourne-ite

Postby Aussiedownunder01 » Mon Jan 14, 2013 6:47 pm

googe wrote:Its great you feel that way already mate, it truely is a great site with so many wonderful people :handgestures-thumbupleft: . Im in Altona North, so not to far from you. Give me a yell if you need any help with places for cheapish copper and parts, there very few and far between in the west :sad: . Might be better up your way. Theres a scrap yard on ballarat rd that sells stuff, scappys i think its called.

Cheers

Hey keep away from there thats my spot :)) :)) :oops:
Aussiedownunder01
 
Posts: 1133
Joined: Tue Sep 11, 2012 7:25 am
Location: So close to melbourne airport you can hear the plains
equipment: 100 litre boiler with a 4 in 5 plate bubbler on top with a 500 packed section standing by if needed

Re: Another Melbourne-ite

Postby googe » Mon Jan 14, 2013 8:25 pm

Haha, didn't realize you were in Melb mate, there a scruffy looking lot at the place lol.
googe
 

Re: Another Melbourne-ite

Postby Goldie » Tue Jan 15, 2013 2:17 am

Hi mate, glad your aboard. Good luck with your journey, this is a very rewarding hobby and as you have already found out that, there are plenty of people in the community willing to lend a hand.
Goldie
 
Posts: 422
Joined: Fri Mar 23, 2012 12:22 am
Location: SOR Perth, WA
equipment: 4" four perf plate column on a 100lt SS boiler, 2" Pot Still on 50lt keg boiler


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 81 guests

x