Hello and thank you

by **Phil** » Fri Feb 08, 2013 10:36 pm

Hi all, I didn't want to post before making a reasonable drink from this hobby. Tonight I'm drinking a few mixed drinks from the bottle that didn't quite make the UJSM oak aging cut so I thought it was time to post and say thank you. I've enjoyed the information and more importantly the constructive thinking and criticism of builds, ideas etc... that most here seem to take in their stride.

I built and have been running a 2" boka on a 32L boiler for a while now making some good 95% with TPW and I did a spirit run today with 3 gens worth of UJSM. I put 5L of the SM @ 60% on AO MT+ dominoes, and another 1L on heavily charred AO dominoes. Trying a bit of it white tonight and it's not too bad compared to the JD I have next to it. I also have 4L of wheat germ at 60% on HT FO dominoes that I made from a used red wine barrel that is almost at a month.

At the moment I’m working on a perforated plate setup that I can slide into the Boka in place of the mesh. I’ll put up some pics and info about this soon in another thread.

Anyway just want to say thank you for all the info here and I hope I can contribute some back.

Regards,
Phil
^:)^

by **MacStill** » Fri Feb 08, 2013 10:40 pm

Great intro Phil, looks like you've got it sussed :handgestures-thumbupleft:

Welcome.

by **Linno** » Fri Feb 08, 2013 10:41 pm

hey Phil

welcome to the forum :handgestures-thumbupleft: sounds like your well underway look forward to some build pics...

by **Linny** » Fri Feb 08, 2013 10:46 pm

:text-worthless:

by **Phil** » Fri Feb 08, 2013 10:57 pm

Cheers guys,

This thread will remain worthless Linny. I'll put some stuff up in the relevant sections. Just saying G'day and thanks.

Phil

by **Linny** » Fri Feb 08, 2013 11:03 pm

its ok , just shit stirring

by **Phil** » Fri Feb 08, 2013 11:04 pm

You just have it up for copper porn :O)

by **crow** » Sat Feb 09, 2013 12:04 am

welcome here Phil, build sounds interesting guess we'll have to wait til you start your build thread :-D

by **bt1** » Sat Feb 09, 2013 7:43 am

Welcome Phil,

geez impressed a complete running still, washes done and perf plat inserts without a single question...what's your secret?...

well enjoy looks like your well underway...look forward to the Boka Mk11

cheers
bt1

by **Sam.** » Sat Feb 09, 2013 7:49 am

Welcome aboard mate, great intro, sounds like your all over it

by **googe** » Sat Feb 09, 2013 9:30 am

Welcome Phil, was a bit worried when I saw your name , thought it was the brother in~law stalking me :laughing-rolling: . I like the sound of your new build, can't wait to see the pics :handgestures-thumbupleft: .

by **Kimbo** » Sat Feb 09, 2013 3:11 pm

good to have ya Phil :handgestures-thumbupleft: