5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchhi from bundy
14 posts
• Page 1 of 1
hi from bundy
by ricko » Thu Nov 13, 2014 6:14 pm
hi got a shitty super reflux still used it a few times on turbo yeast it was fine . till I got on here and read up just done a tpw just ran it through took cuts @ 300 done the taste test kept the middle didn't get as much as I was expecting but the tp wash was only 6 days old lol I think ill build a better still an leave the wash a bit longer
- ricko
- Posts: 6
- Joined: Wed Nov 12, 2014 2:17 pm
- equipment: dirty old super reflux
Re: hi from bundy
by Sam. » Thu Nov 13, 2014 6:26 pm
Welcome to the forum... :handgestures-thumbupleft:
- Sam.
- Lifetime Member
- Posts: 10405
- Joined: Sun Jul 17, 2011 7:19 pm
- Location: South Oz Straya
- equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.
Re: hi from bundy
by Geeps » Thu Nov 13, 2014 6:36 pm
G'day mate and welcome.
Have a good old look in the newbies section there is a lot of info there that should help you out :handgestures-thumbupleft:.
By all means if there is something not there ask away lot of help here.
Enjoy the ride and show some pics of the build (its coming don't worry)
Have a good old look in the newbies section there is a lot of info there that should help you out :handgestures-thumbupleft:.
By all means if there is something not there ask away lot of help here.
Enjoy the ride and show some pics of the build (its coming don't worry)
- Geeps
- Posts: 322
- Joined: Sat Sep 21, 2013 5:52 pm
- equipment: Rose oil extractor
Re: hi from bundy
by MacStill » Thu Nov 13, 2014 6:39 pm
Sam. wrote:Welcome to the forum... :handgestures-thumbupleft:
:text-imwithstupid: :text-+1: :text-thankyoublue:
- MacStill
- Lifetime Member
- Posts: 16835
- Joined: Fri Mar 18, 2011 1:40 pm
- Location: Wide Bay QLD
- equipment: Anything I choose :P
Re: hi from bundy
by SBB » Thu Nov 13, 2014 7:01 pm
Good on ya Ricko , :handgestures-thumbupleft: Sounds like you've already read enough to party learn where you have been going wrong.
- SBB
- Lifetime Member
- Posts: 2451
- Joined: Mon Mar 21, 2011 8:12 pm
- Location: Northern NSW
- equipment: (The Pelican) a 2 inch pot / stripper on 25L electric boiler interchangable with T500 reflux still...... 2 1/2 inch pot still on 50L keg (gas burner).....
3 inch Boka (half share with Draino),...... 4 inch 4 plate perforated plate Bubbler
- Potmash Boka
- Posts: 295
- Joined: Wed Apr 17, 2013 6:18 pm
- Location: The Shire( with all the Hobbits)
- equipment: 2" pot and 4" thumper, 4" pot, 2" SS reflux, 2.5" Boka. 4" 5 plate bubbler( almost done, need to some bits and to make the column round again). SS boiler, 80L keg, 50L keg and a 30L keg boilers.
Various pieces of copper pipe laying around for future experiments.
Re: hi from bundy
by ricko » Thu Nov 13, 2014 7:47 pm
thanks ill yell out if I get stuck or need some advice cheers
- ricko
- Posts: 6
- Joined: Wed Nov 12, 2014 2:17 pm
- equipment: dirty old super reflux
- 1 2many
- Lifetime Member
- Posts: 4215
- Joined: Sun Jan 27, 2013 6:08 am
- Location: Where the sun shines
- equipment: Portable A.G brewery ,#001 5 STAR blockhead 4" Modular 4 plate SSG with,6"inline thumper, 2.5" 9 tube shotgun, packed section, Boiler 50 ltr inverted keg 4"still mount, 2.4 Kw FSD elements 1"drain.
- Whiskyaugogo
- Site Donor
- Posts: 649
- Joined: Mon Jun 16, 2014 2:48 pm
- Location: Canberra, Australia
- equipment: To be updated
Re: hi from bundy
by Zak Griffin » Fri Nov 14, 2014 11:05 am
G'day Ricko. Living in Bundy, It'd be rude not to get a drimm of molasses and a pot still and make some real rum!
Welcome :handgestures-thumbupleft:
Welcome :handgestures-thumbupleft:
- Zak Griffin
- Lifetime Member
- Posts: 6832
- Joined: Mon Jul 15, 2013 9:34 pm
- Location: Radelaide
- equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?
- Andy
- Posts: 1466
- Joined: Tue Aug 28, 2012 6:49 pm
- Location: SOR, Perth
- equipment: Copper Potstill on a 50L keg boiler with a 2200w element.
Doesn't get more simple then that
Re: hi from bundy
by Urrazeb » Fri Nov 14, 2014 4:48 pm
SBB wrote:... Sounds like you've already read enough to party learn...
Party learn!! I do that all the time
:obscene-drinkingdrunk: :techie-typing: :-bd
:laughing-rolling:
Welcome mate :handgestures-thumbupleft:
- Urrazeb
- Posts: 2340
- Joined: Fri Jul 27, 2012 8:42 am
- Location: Perth
- equipment: Column & pot
14 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 68 guests