Braided Hose

This is a forum developed for people looking for distilling hardware, here is where you should post links and information as to where we can find stuff on the net or in your local area.

Braided Hose

Postby Lowie » Sat Jan 14, 2017 3:41 pm

Hi Guys,
for the Croweaters. Scored these braided hoses at Paramount Browns this morning. $3 Each! About 4ft long. They've got a bin full of them.

Cheers
Lowie
You do not have the required permissions to view the files attached to this post.
Lowie
 
Posts: 712
Joined: Sun May 24, 2015 1:32 pm
Location: Crow eater
equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.

Re: Braided Hose

Postby bluc » Sat Jan 14, 2017 3:59 pm

Good score :handgestures-thumbupleft:
bluc
Site Donor
 
Posts: 8967
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Braided Hose

Postby Nino » Sat Jan 14, 2017 4:44 pm

I will have to go and grab some thanks :)
Nino
 
Posts: 354
Joined: Sat Jun 13, 2015 10:33 am
Location: Adelaide S. Aust
equipment: Black Mangus reflux still and 30lt boiler. 4" Modular pot still from FSD. Now a 50lt keg boiler with 2 2400 watt heating elements and a controller. 5 plate bubbler with a 500mm packed section

Re: Braided Hose

Postby wynnum1 » Sun Jan 15, 2017 6:54 am

These braided hoses fail would that be the reason that they are selling cheap would be good to use.
wynnum1
 
Posts: 1494
Joined: Tue Jul 26, 2011 1:18 pm

Re: Braided Hose

Postby Crispy » Sun Jan 15, 2017 3:35 pm

Lowie wrote:Hi Guys,
for the Croweaters. Scored these braided hoses at Paramount Browns this morning. $3 Each! About 4ft long. They've got a bin full of them.

Cheers
Lowie


Hi Lowie,

its hard to tell in the pic but ate they Female/Female? or is there a Male connector on one end?

And thanks for posting...will def try to get down there and pick some up.

Cheers,
Crispy
Crispy
 
Posts: 58
Joined: Sun Jul 19, 2015 11:23 am
Location: Adelaide - Southern Suburbs
equipment: 3inch slant plate LM/VM

Re: Braided Hose

Postby Lowie » Mon Jan 16, 2017 8:00 am

Female-female mate
Lowie
 
Posts: 712
Joined: Sun May 24, 2015 1:32 pm
Location: Crow eater
equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.


Return to Distillers Warehouse



Who is online

Users browsing this forum: No registered users and 9 guests

x