Found CSST convoluted stainless steel tubing in Aus

This is a forum developed for people looking for distilling hardware, here is where you should post links and information as to where we can find stuff on the net or in your local area.

Found CSST convoluted stainless steel tubing in Aus

Postby 12star » Fri Aug 25, 2017 1:04 pm

Hi
2nd post - was looking around for my new build 3" ccvm for parts

I found a supplier for csst in Aust http://www.cleanwaterproducts.com.au/pr ... ctors.html

$11+gst plus shipping for 1/2" csst x 900mm

So Im waiting on delivery - shipping costs more than the csst! :o

they don't supply 3/8" / 10mm

I hope this helps others
12star
 
Posts: 8
Joined: Sun Jul 09, 2017 7:36 pm
Location: Sth Ozzie
equipment: Pure Distillery - Spirt Maker
30L Beer me Boiler 2000w

Re: Found CSST convoluted stainless steel tubing in Aus

Postby hillzabilly » Fri Aug 25, 2017 1:37 pm

I vaguely remember seeing a condencer coil made from that stuff,is that what ya intend to use it for mate,ccvm plz explain or throw up some pics as I am not quite sure if any of us understand what ya makeing ,it may help us help you better and save you the trouble of changeing something after you are done and find it does not do what ya wanted,welcome aboard by the way plenty ta read in the newbies section and library as well .cheers hillzabilly ;-)
hillzabilly
 
Posts: 1509
Images: 0
Joined: Sun Jun 10, 2012 3:18 pm
Location: PERTH WEST AUSSIE
equipment: 10 gallon OZARK pot still ,2inch and 3inch Nixon Stone coloum stills ,10 and 18 gal beer keg boilers,5gal thumper keg.And the one and only 4" Five Star Southern Cross .

Re: Found CSST convoluted stainless steel tubing in Aus

Postby 12star » Fri Aug 25, 2017 1:47 pm

4 condenser coil = correct
12star
 
Posts: 8
Joined: Sun Jul 09, 2017 7:36 pm
Location: Sth Ozzie
equipment: Pure Distillery - Spirt Maker
30L Beer me Boiler 2000w

Re: Found CSST convoluted stainless steel tubing in Aus

Postby hillzabilly » Fri Aug 25, 2017 2:01 pm

My gut feeling is 900mm may be a bit short if ya throwing a lot of power at it or doing stripping runs for a three inch ,presumeing ya going the 50lt beer keg boiler.As with a vapour mangement still the condencer is under a fair bit of load and has to condence everything .cheers hillzabilly ;-)
hillzabilly
 
Posts: 1509
Images: 0
Joined: Sun Jun 10, 2012 3:18 pm
Location: PERTH WEST AUSSIE
equipment: 10 gallon OZARK pot still ,2inch and 3inch Nixon Stone coloum stills ,10 and 18 gal beer keg boilers,5gal thumper keg.And the one and only 4" Five Star Southern Cross .

Re: Found CSST convoluted stainless steel tubing in Aus

Postby warramungas » Fri Aug 25, 2017 2:58 pm

May be the cheap Bunnings crap I get for showers but they say stainless too. Still have plenty of rust spots over the years though.
warramungas
 
Posts: 1436
Joined: Sun Oct 18, 2015 9:38 pm
Location: Nor Perth
equipment: 180 litre fermenter x 2
30 liter boiler
PDA-1
2" four plate modular bubbler
2" one meter long LM column
110 liter boiler with 25 liter (max) inline thumper
4" x 4 plate bubble cap still

Re: Found CSST convoluted stainless steel tubing in Aus

Postby 12star » Sat Aug 26, 2017 6:59 am

this isn't the stuff you can buy at Bunnings, no inner tube made of plastic or rubber that will kink if you bend it

check out the Falcon Stainless website

:handgestures-thumbupleft:
12star
 
Posts: 8
Joined: Sun Jul 09, 2017 7:36 pm
Location: Sth Ozzie
equipment: Pure Distillery - Spirt Maker
30L Beer me Boiler 2000w


Return to Distillers Warehouse



Who is online

Users browsing this forum: No registered users and 10 guests

x