Page 1 of 1
2.5"-2" reducer
Posted:
Tue Jul 08, 2014 12:10 am
by twojaythomo
Could anyone point me in the right direction to get a 2.5"-2" reducer, maybe in the QLD area or website, can't seem to find any.
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 7:30 am
by Yummyrum
Tradelink plumbing supplies is where I got mine
You willl also need a coupling as well
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 8:38 am
by twojaythomo
Hey thanks again Yum :handgestures-thumbupleft: I have no idea where to go. Bunnings and masters is all I know.
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 10:02 am
by Yummyrum
Look up plumbing supplies in the yellow pages.Places plymbers buy their stuff.
Bunnings only supply domestic sizes.
You could check out Carrington copper online.They have mouthwatering catalogue but no prices.You have to ring them.Their prices are very good and they do mail order
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 10:17 am
by C2H6O
Mix of stainless and copper looks good
http://www.ebay.com.au/itm/63MM-to51MM- ... 3c1&_uhb=1That's from China so the postage will take a while, you could also check with Mac and see if he has one kicking around.
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 12:02 pm
by Sam.
Just be aware that eBay gear from china that states it's 316 may not be true ;-)
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 8:32 pm
by twojaythomo
Is 304 SS no good sorry don't much about metals, will it rust if its not 316?
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 8:37 pm
by Sam.
twojaythomo wrote:Is 304 SS no good sorry don't much about metals, will it rust if its not 316?
No 304 shouldn't rust but shit from china that states it's 304 has been known too, can also be magnetic 8-}
Buy it and find out :handgestures-thumbupleft: if it's shit all you have wasted is your time and money :teasing-tease:
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 9:00 pm
by MacStill
OK
SS304, SS316, SS304L & SS316L are all fine as long as it's welded with the right filler & produced by a "reputable factory" , with the latter being hardest to find.
The cheapest shit you find is generally just that, cheap shit! and the variances in material quality appear.
2.5" sanitary fittings are available, I only stock clamps, ferrules seals in this size, but due to demand this sized components are by pre order only.
I get the whole trying to save money part, but if your order turns to shit who answers you ? Local might be a little slower, but you have me watching your back if your gear turns up not quite right ;-)
2c :smile:
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 9:04 pm
by twojaythomo
After a brief read on the subject I probably would only buy tri clamps off ebay all internal stuff not worth waating money on when you could pay a bit more and only pay once. Thanks mate for the advice.
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 9:06 pm
by MacStill
ya can lead a horse to water... but .... :))
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 9:18 pm
by twojaythomo
Hey Mac would you have a short 2.5" to 2" reducer? Or even a reducer of this size and whats the price on them if you have.
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 9:25 pm
by MacStill
MacStill wrote:2.5" sanitary fittings are available, I only stock clamps, ferrules seals in this size, but due to demand this sized components are by pre order only.
You'd be better off using copper reducers and easy flanges if you want it quick ;-)
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 9:50 pm
by Yummyrum
Yummyrum wrote:Look up plumbing supplies in the yellow pages.Places plumbers buy their stuff.
Bunnings only supply domestic sizes.
You could check out Carrington copper online.They have mouthwatering catalogue but no prices.You have to ring them.Their prices are very good and they do mail order
This is what I was meant
HERE...nice bit of copper porn
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 10:01 pm
by MacStill
twojaythomo wrote:Hey Mac would you have a short 2.5" to 2" reducer? Or even a reducer of this size and whats the price on them if you have.
I've got some copper ones here, how many do you want ? and what are they worth to you ? :))
Re: 2.5"-2" reducer
Posted:
Tue Jul 08, 2014 10:16 pm
by twojaythomo
Everyone loves photos, here are the bits I have so far + a keg the pipe is 2.5" going to a standard keg. So only really need 1 but could use some clamps too. Going to make the column and condenser modular.
Re: 2.5"-2" reducer
Posted:
Wed Jul 09, 2014 9:38 pm
by twojaythomo
Got the reducer from Midway with all may other SS gear, they pretty local to me so was eay to get. I do believe someone on here did metion Midway can't remember where I saw it though.